Camaro / Chevrolet / Make / ZL1 /
2018 Chevrolet Camaro ZL1 – 600whp Track Toy
John brought us his 2018 Chevrolet Camaro ZL1 to get the supercharged LT4 exhaling a bit easier on the road course! Modifications performed by us below:• Stainless Works 2.00” primary ID long-tube headers with high-flow catalytic converters• CORSA Performance Xtreme exhaust system• NGK Spark Plugs LTR7IX-11 spark plugs• MSD Performance spark plug wires• Design Engineering, […]
2018 Chevrolet Camaro ZL1 1LE – Stage-2 Package
Jeff brought us his Arctic Blue Metallic 2018 Chevrolet Camaro ZL1 1LE to get the supercharged LT4 equipped with our Stage-2 package! Modifications below:• Roto-Fab, LLC Big Gulp 5.00″ cold-air intake system• ZPE GripTec 2.31″ upper supercharge pulley & 10-bolt hub• Dedicated Motorsports 10mm wider 6061 aluminum tensioner pulley• Gates Corporation HD Fleetrunner Micro-V “Green” […]
2017 Chevrolet Camaro SS – Whipple 2.9L
Steve brought us his 2017 Chevrolet Camaro SS for it’s third round of work! The goal with this project was to safely hit the 700whp mark on 93 octane, and lay the groundwork for more power down the road. The solution? Our LT1 drop-in pistons & connecting rods package! Full build details below: Performed by us:• […]
2016 Chevrolet Camaro SS – Drop In Pistons
Ryan brought us his 2016 Chevrolet Camaro SS to have the LT1 reinforced! With the previously installed Edelbrock Performance E-Force TVS2300 supercharger system pushing on the stock bottom end limitations, Ryan wanted to proactively build the engine so that it’s solid when he’s ready to turn the wick up! Modifications performed by us below:• Gwatney Performance […]
2019 Camaro ZL1 – Stage 3 Package
Michael brought us his 2019 Chevrolet Camaro ZL1 with the goal of adding 130-150whp on 93 octane while maintaining stock-like drivability. The solution? Our Stage-3 package! Modifications below: Performed by us:• Kong Performance OEM supercharger/snout porting service matched to 103mm throttle body• ZPE GripTec 2.30″ upper pulley• Dedicated Motorsports 10mm wider 6061 aluminum tensioner pulley• Gates […]
2019 Chevrolet Corvette Grand Sport
Rick’s 2019 Chevrolet Corvette Grand Sport, finished in a fitting Sebring Orange Tintcoat, comes out of the box as a great platform, sporting loads of performance straight from the factory. With plans to track the car on road courses, Rick wanted more. The objective for the C7 was simple: increase throttle response, allow the engine […]