- Packages
- Ford
- Mustang
- 2018-2022 - S550 II
- 2019-2020 Bullitt
2019-2020 Bullitt
2018-2022 - S550 II
Packages, constructed to build your vehicle to set limits, can be found below. Contact us today to learn more about what we can do for your vehicle and get a custom quote!
Contact Us Today For A Custom Quote!Packages
Naturally Aspirated About These Packages These packages use no power adder such as supercharger, turbocharger, or nitrous, and instead are designed to increase the engine's performance by improving efficiency.
Stage 1 | Up to 515hp*
Up to +35hp*
Contact for PricingStage 2 | Up to 540hp*
Up to +60hp*
Contact for PricingStage 3 | Up to 555hp*
Up to +75hp*
Contact for Pricing Whipple Supercharged About These Packages These packages use superchargers (often referred to as "blowers") and other supporting modifications to significantly increase performance by safely forcing compressed air into the engine.
Stage 1 | Up to 750hp*
Up to +270hp*
Contact for PricingStage 2 | Up to 800hp*
Up to +320hp*
Contact for PricingStage 3 | Up to 820hp*
Up to +380hp*
Contact for Pricing VMP Supercharged About These Packages These packages use superchargers (often referred to as "blowers") and other supporting modifications to significantly increase performance by safely forcing compressed air into the engine.
Stage 1 | Up to 750hp*
Up to +270hp*
Contact for PricingStage 2 | Up to 800hp*
Up to +320hp*
Contact for PricingStage 3 | Up to 820hp*
Up to +340hp*
Contact for PricingNaturally Aspirated | 93 Octane | Flex Fuel Optional
Stage 1 | Up to 515hp*
Up to +35hp*
Contact Us Today!Contact for Pricing
Includes
- JLT Performance air-intake system
- HP Tuners credits
- Professional installation
- Professional dyno calibration
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Naturally Aspirated | 93 Octane | Flex Fuel Optional
Stage 2 | Up to 540hp*
Up to +60hp*
Contact Us Today!Contact for Pricing
Includes
- JLT Performance air-intake system
- Stainless Works Stainless Power 1.875” primary ID long-tube headers with high-flow catalytic converters
- OEM Ford multi-layer steel exhaust manifold gaskets
- HP Tuners credits
- Professional installation
- Professional dyno calibration
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Naturally Aspirated | 93 Octane | Flex Fuel Optional
Stage 3 | Up to 555hp*
Up to +75hp*
Contact Us Today!Contact for Pricing
Includes
- JLT Performance air-intake system
- JLT Performance air-oil separator
- Air Flow Solutions ported OEM 2018-2021 Ford Mustang GT intake manifold
- Stainless Works Stainless Power 1.875” primary ID long-tube headers with high-flow catalytic converters
- OEM Ford multi-layer steel exhaust manifold gaskets
- Stainless Works Redline Series catalytic-converter-back 3.00" exhaust system
- - For models with active exhaust valves.
- MMR lightweight billet aluminum water pump pulley
- Reische 170° thermostat
- Genuine OEM Ford coolant to complete installation
- HP Tuners credits
- Baseline dyno runs
- Professional installation
- Professional dyno calibration
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- Whipple Superchargers 3.0L Gen-V W185ax Stage-1 supercharger system
- 4.00" upper supercharger pulley
- 38lb/hr fuel injectors for 2018-2019 models, 55lb/hr fuel injectors for 2020-2021 models
- Denso ITV-24 spark plugs
- MMR billet oil pump gears & crankshaft sprocket
- Genuine OEM Ford gaskets, seals, fluids, and fasteners required for installation
- JLT Performance passenger-side air/oil separator
- HP Tuners credits
- Baseline dyno runs
- Professional installation
- Professional dyno calibration
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- Whipple Superchargers 3.0L Gen-V W185ax Stage-2 supercharger system
- 3.750" upper supercharger pulley
- Whipple Superchargers 132mm billet Roval throttle body
- DeatschWerks DW400 in-tank fuel pump
- 38lb/hr fuel injectors for 2018-2019 models, 55lb/hr fuel injectors for 2020-2021 models
- Denso ITV-24 spark plugs
- MMR billet oil pump gears & crankshaft sprocket
- Stainless Works 2.00” primary ID long-tube headers with high-flow catalytic converters
- OEM Ford multi-layer steel exhaust manifold gaskets
- Genuine OEM Ford gaskets, seals, fluids, and fasteners required for installation
- JLT Performance passenger-side air/oil separator
- HP Tuners credits
- Baseline dyno runs
- Professional installation
- Professional dyno calibration
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- Whipple Superchargers 3.0L Gen-V W185ax Stage-2 supercharger system
- 3.50" upper supercharger pulley
- Oversized aluminum heat exchanger
- Whipple Superchargers 132mm billet Roval throttle body
- DeatschWerks DW400 in-tank fuel pump
- 38lb/hr fuel injectors for 2018-2019 models, 55lb/hr fuel injectors for 2020-2021 models
- Denso ITV-24 spark plugs
- MMR billet oil pump gears & crankshaft sprocket
- MMR cylinder head cooling modification (HCM)
- Stainless Works 2.00” primary ID long-tube headers with high-flow catalytic converters
- OEM Ford multi-layer steel exhaust manifold gaskets
- Mantic Clutch 9000 series Ceremetallic twin-disc clutch
- Genuine OEM Ford gaskets, seals, fluids, and fasteners required for installation
- JLT Performance passenger-side air/oil separator
- HP Tuners credits
- Baseline dyno runs
- Professional installation
- Professional dyno calibration
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- VMP Performance Loki supercharger system
- 88mm upper supercharger pulley
- VMP Performance billet fuel rails
- 56lb/hr fuel injectors
- VMP Performance fuel pump voltage booster
- NGK LTR7IX-11 spark plugs
- MMR billet oil pump gears & crankshaft sprocket
- VMP Performance single-pass heat exchanger
- Reische 170° thermostat
- JLT Performance passenger-side air/oil separator
- HP Tuners credits
- Baseline dyno runs
- Professional installation
- Professional dyno calibration
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- VMP Performance Odin supercharger system
- 88mm upper supercharger pulley
- VMP Performance Twinjet twin-69mm throttle body
- VMP Performance/aFe POWER 120mm intake system
- VMP Performance billet fuel rails
- 56lb/hr fuel injectors
- VMP Performance fuel pump voltage booster
- NGK LTR7IX-11 spark plugs
- MMR billet oil pump gears & crankshaft sprocket
- VMP Performance triple-pass heat exchanger with dual-11.00" electric fans
- Stainless Works Stainless Power 1.875” primary ID long-tube headers with high-flow catalytic converters
- OEM Ford multi-layer steel exhaust manifold gaskets
- Genuine OEM Ford gaskets, seals, fluids, and fasteners required for installation
- JLT Performance passenger-side air/oil separator
- HP Tuners credits
- Baseline dyno runs
- Professional installation
- Professional dyno calibration
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- VMP Performance Odin supercharger system
- GripTec custom 86mm upper supercharger pulley
- VMP Performance Twinjet twin-69mm throttle body
- VMP Performance/aFe POWER 120mm intake system
- VMP Performance billet fuel rails
- 56lb/hr fuel injectors
- VMP Performance fuel pump voltage booster
- NGK LTR7IX-11 spark plugs
- MMR billet oil pump gears & crankshaft sprocket
- VMP Performance triple-pass heat exchanger with dual-11.00" electric fans
- Stainless Works 2.00” primary ID long-tube headers with high-flow catalytic converters
- OEM Ford multi-layer steel exhaust manifold gaskets
- Genuine OEM Ford gaskets, seals, fluids, and fasteners required for installation
- JLT Performance passenger-side air/oil separator
- HP Tuners credits
- Baseline dyno runs
- Professional installation
- Professional dyno calibration
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
VMP Superchargers – Loki and Odin – Differences Explained
VMP Superchargers - Loki and Odin - Differences ExplainedVMP is well known for its superchargers and offers tremendous options for Ford Mustang and F-150 models. This video dives into the Loki and Odin systems, how they are alike, and the key differences that drive additional performance through the Odin system. << Back [...]
See Full PostCheck out some of the featured Builds!
2019 Ford Mustang Bullitt – Whipple Supercharged
Another boosted Bullitt wrapped up and on the prowl! This one belongs to Steve, who wanted to add some more spice to his 2019 Ford Mustang Bullitt, but didn't want to go quite as far off the bat as we have with some of the other Bullitts. Modifications performed below: • [...]
See Full Post2018 Ford Mustang GT – 3.0L Whipple
The 2018-2019 Ford Mustang GT: an entirely new breed of Mustang and performance car alike -- stock-for-stock, it really is an incredible performance package right off the showroom floor. But let's be real, who leaves an S550 stock? The alluring gains from just an intake & tune alone are hard [...]
See Full PostVelocity Blue 2020 Ford Mustang Shelby GT350
GT350 + bolt-ons + Flex Fuel = ~530whp. That equation is exactly what Zane brought us his brand new Velocity Blue 2020 Ford Mustang Shelby GT350 for!Up first, we started off by performing pre-work dyno pulls to establish our starting point, coming in at a factory-freak level of 486.57whp & [...]
See Full PostOur Guarantee
12-month/12,000-mile Workmanship Warranty
As enthusiasts ourselves, we treat our customers as we would want to be treated. What does that mean? It means we advise our customers on how to best achieve their goals, we set expectations properly, give each and every customer an absolutely unforgettable experience, and above all, we stand behind our work.
Simply put: we guarantee if we miss the mark, we make it right.
This shield of assurance not only applies to the work we perform on your vehicle, but also to your vehicle itself while in our care. All customer cars are treated like our own and kept inside under lock-and-key at night. At the end of the day, we always do what’s right! Isn’t it time you work with a speed shop that can say that?
Interested to learn more about what our warranty does and does not cover? Click here to view our Customer Service Agreement.
Richmond, VA
4022 Glenside Drive, Richmond, VA 23228
HOURS
Monday – Friday: 8:30am-5:30pm
Closed Saturday & Sunday
Phone
(804) 214-3586