C7 Z06
2014-2019 - C7
Packages, constructed to build your vehicle to set limits, can be found below. Contact us today to learn more about what we can do for your vehicle and get a custom quote!
Contact Us Today For A Custom Quote!Packages
Stock Eaton TVS1740 Supercharger About These Packages These packages use superchargers (often referred to as "blowers") and other supporting modifications to significantly increase performance by safely forcing compressed air into the engine.
Stage 1 | Up to 720hp*
Up to +70hp*
$3,299* – Includes Installation & TuningStage 2 | Up to 750hp*
Up to +100hp*
$6,899* – Includes Installation & TuningStage 3 | Up to 800hp*
Up to +150hp*
$13,099* – Includes Installation & TuningStage 4 | Manual | Up to 870hp*
Up to 220hp*
$18,799* – Includes Installation & TuningStage 4 | Auto | Up to 870hp*
Up to 220hp*
$21,699* – Includes Installation & Tuning Magnuson Supercharger About These Packages These packages use superchargers (often referred to as "blowers") and other supporting modifications to significantly increase performance by safely forcing compressed air into the engine.
Stage 1 | Up to 790hp*
Up to +140hp*
$10,599* – Includes Installation & TuningStage 2 | Up to 820hp*
Up to +170hp*
$14,599* – Includes Installation & TuningStage 3 | Manual | Up to 890hp*
Up to +250hp*
$25,299* – Includes Installation & TuningStage 3 | Auto | Up to 890hp*
Up to +250hp*
$27,199* – Includes Installation & Tuning$3,299* – Includes Installation & Tuning
Includes
- aFe Power Momentum Pro 5R cold-air intake system
- GripTec 2.30" upper supercharge pulley & 10-bolt hub
- Dedicated Motorsports 10mm wider 6061 aluminum tensioner pulley
- Gates HD Fleetrunner Micro-V "Green" belt
- NGK LTR7IX-11 spark plugs
- Mightymouse Solutions Mild catch can
- HP Tuners credits
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
$6,899* – Includes Installation & Tuning
Includes
- aFe Power Momentum Pro 5R cold-air intake system
- GripTec 2.31" upper supercharge pulley & 10-bolt hub
- Dedicated Motorsports 10mm wider 6061 aluminum tensioner pulley
- Gates HD Fleetrunner Micro-V "Green" belt
- Stainless Works 1.875” primary ID long-tube headers with high-flow catalytic converters
- OEM GM multi-layer steel exhaust manifold gaskets
- NGK LTR7IX-11 spark plugs
- Hinson Motorsports spark plug wires
- DEI Protect-a-Boot sleeves
- DEI Heat Shroud applied to oxygen sensor wires and oil cooler lines
- Mightymouse Solutions Mild catch can
- HP Tuners credits
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
$13,099* – Includes Installation & Tuning
Includes
- Kong Performance ported supercharger & inlet port matched to 103mm throttle body
- Nick Williams 103mm throttle body
- aFe Power Momentum Pro 5R cold-air intake system
- GripTec 2.40" upper supercharge pulley & 10-bolt hub
- ATI Performance Super Damper harmonic balancer
- ATI Performance 8.437"/5% overdrive lower supercharger pulley
- Dedicated Motorsports 10mm wider 6061 aluminum tensioner pulley
- Gates HD Fleetrunner Micro-V "Green" belt
- AFCO Racing heat exchanger
- Cordes Performance Racing supercharger coolant expansion tank
- DSX Tuning auxiliary fuel pump
- Stainless Works 2.00” primary ID long-tube headers with high-flow catalytic converters
- OEM GM multi-layer steel exhaust manifold gaskets
- NGK LTR7IX-11 spark plugs
- MSD Performance spark plug wires
- DEI Protect-a-Boot sleeves
- DEI Heat Shroud applied to oxygen sensor wires and oil cooler lines
- Mightymouse Solutions Mild catch can
- Lingenfelter Performance Engineering 160° thermostat
- Genuine OEM GM gaskets, seals, fluids, and fasteners required for installation
- HP Tuners credits
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
$18,799* – Includes Installation & Tuning
Includes
- Kong Performance ported supercharger & inlet port matched to 103mm throttle body
- Nick Williams 103mm throttle body
- aFe Power Momentum Pro 5R cold-air intake system
- GripTec 2.40" upper supercharge pulley & 10-bolt hub
- ATI Performance Super Damper harmonic balancer
- ATI Performance 8.800"/10% overdrive lower supercharger pulley
- Dedicated Motorsports 10mm wider 6061 aluminum tensioner pulley
- Gates HD Fleetrunner Micro-V "Green" belt
- GPI PD3 camshaft with 38% fuel pump lobe
- HPFP lash set
- COMP Cams phaser lock-out
- GMPP Corvette C5R/C6R timing chain
- OEM GM LT4 engine oil pump
- AFM/DOD plugs
- .660" lift valve spring & retainer setup
- Johnson Lifters 2110 hydraulic roller lifters
- Hardened chromoly steel pushrods
- Trunnion bearing upgrade
- ARP Pro Series cylinder head bolts
- AFCO Racing heat exchanger
- Cordes Performance Racing supercharger coolant expansion tank
- DSX Tuning auxiliary fuel pump
- Kooks Headers 2.00” primary ID long-tube headers with GREEN EPA Compliant catalytic converters
- OEM GM multi-layer steel exhaust manifold gaskets
- NGK LTR7IX-11 spark plugs
- MSD Performance spark plug wires
- DEI Protect-a-Boot sleeves
- DEI Heat Shroud applied to oxygen sensor wires and oil cooler lines
- Mightymouse Solutions Mild catch can
- Lingenfelter Performance Engineerin 160° thermostat
- Genuine OEM GM gaskets, seals, fluids, and fasteners required for installation
- HP Tuners credits
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
$21,699* – Includes Installation & Tuning
Includes
- Kong Performance ported supercharger & inlet port matched to 103mm throttle body
- Nick Williams 103mm throttle body
- aFe Power Momentum Pro 5R cold-air intake system
- GripTec 2.40" upper supercharge pulley & 10-bolt hub
- ATI Performance Super Damper harmonic balancer
- ATI Performance 8.800"/10% overdrive lower supercharger pulley
- Dedicated Motorsports 10mm wider 6061 aluminum tensioner pulley
- Gates HD Fleetrunner Micro-V "Green" belt
- GPI PD3 camshaft with 38% fuel pump lobe
- HPFP lash set
- COMP Cams phaser lock-out
- GMPP Corvette C5R/C6R timing chain
- OEM GM LT4 engine oil pump
- AFM/DOD plugs
- .660" lift valve spring & retainer setup
- Johnson Lifters 2110 hydraulic roller lifters
- Hardened chromoly steel pushrods
- Trunnion bearing upgrade
- ARP Pro Series cylinder head bolts
- AFCO Racing heat exchanger
- Cordes Performance Racing supercharger coolant expansion tank
- DSX Tuning auxiliary fuel pump
- Circle D Specialties 258mm Pro Series 8L90 torque converter with 3,200rpm stall speed
- Kooks Headers 2.00” primary ID long-tube headers with GREEN EPA Compliant catalytic converters
- OEM GM multi-layer steel exhaust manifold gaskets
- NGK LTR7IX-11 spark plugs
- MSD Performance spark plug wires
- DEI Protect-a-Boot sleeves
- DEI Heat Shroud applied to oxygen sensor wires and oil cooler lines
- Mightymouse Solutions Mild catch can
- Lingenfelter Performance Engineerin 160° thermostat
- Genuine OEM GM gaskets, seals, fluids, and fasteners required for installation
- HP Tuners credits
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
$10,599* – Includes Installation & Tuning
Includes
- Magnuson Superchargers Magnum DI TVS2650R supercharger system
- 90mm upper supercharger pulley
- aFe Power Momentum Pro 5R cold-air intake system
- 90mm supercharger inlet
- Dedicated Motorsports 10mm wider 6061 aluminum tensioner pulley
- NGK LTR7IX-11 spark plugs
- Mightymouse Solutions Mild catch can
- Lingenfelter Performance Engineering 160° thermostat
- Genuine OEM GM gaskets, seals, fluids, and fasteners required for installation
- HP Tuners credits
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
$14,599* – Includes Installation & Tuning
Includes
- Magnuson Superchargers Magnum DI TVS2650R supercharger system
- 90mm upper supercharger pulley
- aFe Power Momentum Pro 5R cold-air intake system
- 90mm supercharger inlet
- Dedicated Motorsports 10mm wider 6061 aluminum tensioner pulley
- Stainless Works 2.00” primary ID long-tube headers with high-flow catalytic converters
- OEM GM multi-layer steel exhaust manifold gaskets
- MSD Performance spark plug wires
- DEI Protect-a-Boot sleeves
- DEI Heat Shroud applied to oxygen sensor wires and oil cooler lines
- NGK LTR7IX-11 spark plugs
- Mightymouse Solutions Mild catch can
- Lingenfelter Performance Engineering 160° thermostat
- Genuine OEM GM gaskets, seals, fluids, and fasteners required for installation
- HP Tuners credits
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
$25,299* – Includes Installation & Tuning
Includes
- Magnuson Superchargers Magnum DI TVS2650R supercharger system
- 90mm upper supercharger pulley
- ATI Performance Super Damper harmonic balancer
- ATI Performance 8.800"/10% overdrive lower supercharger pulley
- Gates HD Fleetrunner Micro-V "Green" belt
- Dedicated Motorsports 10mm wider 6061 aluminum tensioner pulley
- aFe Power Momentum Pro 5R cold-air intake system
- 103mm supercharger inlet
- Nick Williams 103mm throttle body
- GPI PD3 camshaft with 38% fuel pump lobe
- HPFP lash set
- COMP Cams phaser lock-out
- GMPP Corvette C5R/C6R timing chain
- OEM GM LT4 engine oil pump
- AFM/DOD plugs
- .660" lift valve spring & retainer setup
- Johnson Lifters 2110 hydraulic roller lifters
- Hardened chromoly steel pushrods
- Trunnion bearing upgrade
- ARP Pro Series cylinder head bolts
- AFCO Racing heat exchanger
- Cordes Performance Racing supercharger coolant expansion tank
- DSX Tuning auxiliary fuel pump
- Kooks Headers 2.00” primary ID long-tube headers with GREEN EPA Compliant catalytic converters
- OEM GM multi-layer steel exhaust manifold gaskets
- NGK LTR7IX-11 spark plugs
- MSD Performance spark plug wires
- DEI Protect-a-Boot sleeves
- DEI Heat Shroud applied to oxygen sensor wires
- Mightymouse Solutions Mild catch can
- Lingenfelter Performance Engineering 160° thermostat
- Genuine OEM GM gaskets, seals, fluids, and fasteners required for installation
- HP Tuners credits
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
$27,199* – Includes Installation & Tuning
Includes
- Magnuson Superchargers Magnum DI TVS2650R supercharger system
- 90mm upper supercharger pulley
- ATI Performance Super Damper harmonic balancer
- ATI Performance 8.800"/10% overdrive lower supercharger pulley
- Gates HD Fleetrunner Micro-V "Green" belt
- Dedicated Motorsports 10mm wider 6061 aluminum tensioner pulley
- aFe Power Momentum Pro 5R cold-air intake system
- 103mm supercharger inlet
- Nick Williams 103mm throttle body
- GPI PD3 camshaft with 38% fuel pump lobe
- HPFP lash set
- COMP Cams phaser lock-out
- GMPP Corvette C5R/C6R timing chain
- OEM GM LT4 engine oil pump
- AFM/DOD plugs
- .660" lift valve spring & retainer setup
- Johnson Lifters 2110 hydraulic roller lifters
- Hardened chromoly steel pushrods
- Trunnion bearing upgrade
- ARP Pro Series cylinder head bolts
- AFCO Racing heat exchanger
- Cordes Performance Racing supercharger coolant expansion tank
- DSX Tuning auxiliary fuel pump
- Circle D Specialties 258mm Pro Series 8L90 torque converter with 3,200rpm stall speed
- Kooks Headers 2.00” primary ID long-tube headers with GREEN EPA Compliant catalytic converters
- OEM GM multi-layer steel exhaust manifold gaskets
- NGK LTR7IX-11 spark plugs
- MSD Performance spark plug wires
- DEI Protect-a-Boot sleeves
- DEI Heat Shroud applied to oxygen sensor wires
- Mightymouse Solutions Mild catch can
- Lingenfelter Performance Engineering 160° thermostat
- Genuine OEM GM gaskets, seals, fluids, and fasteners required for installation
- HP Tuners credits
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Check out some of the featured builds!
2015 Chevrolet Corvette Z06
Rickey's 2015 Chevrolet Corvette Z06 is in for the first round of work! Up first, Jared set the LT4 up with a ZPE GripTec 2.31" upper supercharger pulley, a Holley Performance Products iNTECH intake system, AFCO Racingheat exchanger, Brian Tooley Racing 160° thermostat, Stainless Works long-tube headers, MSD Performance spark plug wires with Design Engineering, Inc. Protect-a-Boots, and NGK Spark Plugs LTR7IX spark [...]
See Full Post2015 Chevrolet Corvette Z06 – 1000HP
Mike brought us his 2015 Chevrolet Corvette Z06 for the first round of modifications! Well over 1,000bhp worth…With optimum reliability and bigger goals in mind for the future, Mike wanted to overbuild & over support this round, so that he has to change as little as possible down the [...]
See Full Post2015 Chevrolet Corvette Z06 – 720HP
Paul brought in his gorgeous Laguna Blue Tricoat 2015 Chevrolet Corvette Z06 for the first round of modifications! Up first, Charlie strapped the C7 down for some pre-work pulls (baselining at 546.12whp & 585.82lbft), then she went to the shop where Archer installed a ZPE GripTec 2.38" upper pulley to [...]
See Full PostTorch Red 2017 Chevrolet Corvette Z06 – Custom Camshaft
Roland brought us his Torch Red 2017 Chevrolet Corvette Z06 for a custom camshaft to get the LT4 loping harder and to lay the groundwork for future rounds of work! Modifications below: Pre-existing:• aFe POWER air-intake system• CORSA Performance X-pipe Performed by us:• Cam Motion custom-designed 5150 billet-core camshaft• .060" HPFP lash [...]
See Full PostOur Guarantee
12-month/12,000-mile Workmanship Warranty
As enthusiasts ourselves, we treat our customers as we would want to be treated. What does that mean? It means we advise our customers on how to best achieve their goals, we set expectations properly, give each and every customer an absolutely unforgettable experience, and above all, we stand behind our work.
Simply put: we guarantee if we miss the mark, we make it right.
This shield of assurance not only applies to the work we perform on your vehicle, but also to your vehicle itself while in our care. All customer cars are treated like our own and kept inside under lock-and-key at night. At the end of the day, we always do what’s right! Isn’t it time you work with a speed shop that can say that?
Interested to learn more about what our warranty does and does not cover? Click here to view our Customer Service Agreement.
Richmond, VA
4022 Glenside Drive, Richmond, VA 23228
HOURS
Monday – Friday: 8:30am-5:30pm
Closed Saturday & Sunday
Phone
(804) 214-3586
Wilmington, NC
6779 Gordon Rd, Wilmington, NC 28411
Hours
Monday – Friday: 8:30am-5:30pm
Closed Saturday & Sunday
Phone
(910) 332-5901