Camaro / Chevrolet /

2015 Chevrolet Camaro ZL1 – 650HP

Corey brought us his 2015 Chevrolet Camaro ZL1 to get it Flex Fuel enabled, breathing better, and dialed in to 650whp!Up first, Tim set the LSA engine up with an air-intake system from JLT Performance, GripTec 2.35″ upper supercharger pulley from ZPE, Green HD Fleetrunner belt from Gates, solid supercharger isolator from Lingenfelter Performance Engineering, […]

View Full Post →

1966 Chevrolet Malibu – Twin Turbocharged

Classic styling, twin turbocharged, modern engine controls and ~800whp of pump gas power on tap — for many of us, that’s an absolute dream of a street car, and that perfectly describes Rick’s 1966 Chevrolet Malibu!Obviously, this car and the build is absolutely gorgeous, but had a few issues Rick wanted us to address, along […]

View Full Post →

2016 Chevrolet SS – Whipple Supercharged

Devon brought us his 2016 Chevrolet SS to inject a little Australian HSV GTS spirit (i.e., BOOST) into this displaced Holden Commodore VF!Up first, John performed pre-work dyno pulls to establish our starting point (baselining at 391.08whp & 391.49lbft), then she went to the shop for Louis to set the LS3 up with a 2.9L […]

View Full Post →

2007 Chevrolet Corvette Z06

Alan brought us his 2007 Chevrolet Corvette Z06 to address the LS7’s infamous valve drop issues, add another 100whp+ worth of naturally aspirated power, all while maintaining optimal driveability!Up first, John performed baseline dyno runs to establish our starting point, coming in at 444.69whp & 432.73lbft. Then in the shop, Louis disassembled the LS7 to […]

View Full Post →

2014 Chevrolet Corvette – Supercharged

James brought us his 2014 Chevrolet Corvette to have the LT1 loaded with forged internals, the boost turned, and to break the 700whp mark on pump gas!Up first in the shop, Andrew removed & disassembled the LT1 to the bare block, and then reassembled with Wiseco Automotive drop-in pistons, Katech CNC ported cylinder heads, Jannetty […]

View Full Post →

2017 Chevrolet Camaro SS – Whipple Supercharged

Steve brought us his 2017 Chevrolet Camaro SS in to have the LT1 put under some pressure!Up first in the shop, Archer installed a W175AX 2.9L twin-screw system from Whipple Superchargers, Super Damper from ATI Performance Products, 1.875″ primary OD long-tube headers from Stainless Works Cerakoted by Detective Coating connecting to a full exhaust system […]

View Full Post →