- Packages
- Ford
- Mustang
- 2011-2014 - S197 II
- Mustang GT
Mustang GT
2011-2014 - S197 II
Sure, your Mustang GT’s factory 412HP is great, but since you’re reading this, that means you’re ready for more! Whether you’re looking for a Performance Package to take your Gen-I Coyote 5.0L up to nearly 800HP, or are interested in specific services, we can help you meet your goals!
Scroll Down To Learn More!Packages
Naturally Aspirated About These Packages These packages use no power adder such as supercharger, turbocharger, or nitrous, and instead are designed to increase the engine's performance by improving efficiency.
Stage 1 | Up to 445hp*
Up to +35hp*
Contact for PricingStage 2 | Up to 460hp*
Up to +50hp*
Contact for PricingStage 3 | Up to 485hp*
Up to +75hp*
Contact for PricingWhipple Supercharged About These Packages These packages use superchargers (often referred to as "blowers") and other supporting modifications to significantly increase performance by safely forcing compressed air into the engine.
Stage 1 | Up to 700hp*
Up to +290hp*
Contact for PricingStage 2 | Up to 730hp*
Up to +320hp*
Contact for PricingVMP Supercharged About These Packages These packages use superchargers (often referred to as "blowers") and other supporting modifications to significantly increase performance by safely forcing compressed air into the engine.
Stage 1 | Up to 700hp*
Up to +290hp*
Contact for PricingStage 2 | Up to 750hp*
Up to +340hp*
Contact for PricingStage 3 | Up to 770hp*
Up to +360hp*
Contact for PricingContact for Pricing
Includes
- JLT Performance air-intake system
- HP Tuners credits
- Professional installation by National Speed Performance Technicians
- Professional ECU calibration
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Ready For More From Your Mustang?
Contact Us Today!Contact for Pricing
Includes
- JLT Performance air-intake system
- Stainless Works Stainless Power 1.875” primary ID long-tube headers with high-flow catalytic converters
- OEM Ford multi-layer steel exhaust manifold gaskets
- HP Tuners credits
- Professional installation by National Speed Performance Technicians
- Professional ECU calibration
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact Us!
Contact Us Today!Contact for Pricing
Includes
- JLT Performance air-intake system
- JLT Performance passenger-side air/oil separator
- OEM 2018-2021 Ford Mustang GT intake manifold
- MMR CMCV lock-outs for 2018-2021 Ford Mustang GT intake manifold
- Stainless Works Stainless Power 1.875” primary ID long-tube headers with high-flow catalytic converters
- OEM Ford multi-layer steel exhaust manifold gaskets
- Borla S-Type 3.00" catalytic-converter-back exhaust system
- Reische 170° thermostat
- Genuine OEM Ford coolant to complete installation
- HP Tuners credits
- Professional installation by National Speed Performance Technicians
- Professional ECU calibration
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Ready For More From Your Mustang?
Contact Us Today!Contact for Pricing
Includes
- Whipple Superchargers 3.0L Gen-V W185ax Stage-1 supercharger system
- 4.00" upper supercharger pulley
- 2013-2014 Ford Mustang Shelby GT500 55lb/hr fuel injectors
- NGK LTR7IX-11 spark plugs
- MMR billet oil pump gears & crankshaft sprocket
- Genuine OEM Ford gaskets, seals, fluids, and fasteners required for installation
- JLT Performance passenger-side air/oil separator
- HP Tuners credits
- Baseline dyno runs
- Professional installation
- Professional dyno calibration
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Ready For More From Your Mustang?
Contact Us Today!Contact for Pricing
Includes
- Whipple Superchargers 3.0L Gen-V W185ax Stage-2 supercharger system
- 3.875" upper supercharger pulley
- Whipple Superchargers 132mm billet Roval throttle body
- 2013-2014 Ford Mustang Shelby GT500 55lb/hr fuel injectors
- MSD Performance fuel pump voltage booster
- NGK LTR7IX-11 spark plugs
- MMR billet oil pump gears & crankshaft sprocket
- Kooks Headers 2.00” primary ID long-tube headers with high-flow catalytic converters
- OEM Ford multi-layer steel exhaust manifold gaskets
- Genuine OEM Ford gaskets, seals, fluids, and fasteners required for installation
- JLT Performance passenger-side air/oil separator
- HP Tuners credits
- Baseline dyno runs
- Professional installation
- Professional dyno calibration
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Ready For More From Your Mustang?
Contact Us Today!Contact for Pricing
Includes
- VMP Performance Loki supercharger system
- 88mm upper supercharger pulley
- VMP Performance billet fuel rails
- 56lb/hr fuel injectors
- VMP Performance fuel pump voltage booster
- NGK LTR7IX-11 spark plugs
- MMR billet oil pump gears & crankshaft sprocket
- VMP Performance single-pass heat exchanger
- Reische 170° thermostat
- Genuine OEM Ford gaskets, seals, fluids, and fasteners required for installation
- JLT Performance passenger-side air/oil separator
- HP Tuners credits
- Baseline dyno runs
- Professional installation
- Professional dyno calibration
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Ready For More From Your Mustang?
Contact Us Today!Contact for Pricing
Includes
- VMP Performance Odin supercharger system
- 88mm upper supercharger pulley
- VMP Performance Twinjet twin-69mm throttle body
- VMP Performance/aFe POWER 120mm intake system
- VMP Performance billet fuel rails
- 56lb/hr fuel injectors
- VMP Performance fuel pump voltage booster
- NGK LTR7IX-11 spark plugs
- MMR billet oil pump gears & crankshaft sprocket
- VMP Performance triple-pass heat exchanger with dual-11.00" electric fans
- Stainless Works Stainless Power 1.875” primary ID long-tube headers with high-flow catalytic converters
- Reische 170° thermostat
- OEM Ford multi-layer steel exhaust manifold gaskets
- Genuine OEM Ford gaskets, seals, fluids, and fasteners required for installation
- JLT Performance passenger-side air/oil separator
- HP Tuners credits
- Baseline dyno runs
- Professional installation
- Professional dyno calibration
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Ready For More From Your Mustang?
Contact Us Today!Contact for Pricing
Includes
- VMP Performance Odin supercharger system
- GripTec custom 86mm upper supercharger pulley
- VMP Performance Twinjet twin-69mm throttle body
- VMP Performance/aFe POWER 120mm intake system
- VMP Performance billet fuel rails
- 56lb/hr fuel injectors
- VMP Performance fuel pump voltage booster
- NGK LTR7IX-11 spark plugs
- MMR billet oil pump gears & crankshaft sprocket
- VMP Performance triple-pass heat exchanger with dual-11.00" electric fans
- Kooks Headers 2.00” primary ID long-tube headers with high-flow catalytic converters
- Reische 170° thermostat
- OEM Ford multi-layer steel exhaust manifold gaskets
- Genuine OEM Ford gaskets, seals, fluids, and fasteners required for installation
- JLT Performance passenger-side air/oil separator
- HP Tuners credits
- Baseline dyno runs
- Professional installation
- Professional dyno calibration
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Ready For More From Your Mustang?
Contact Us Today!VMP Superchargers – Loki and Odin – Differences Explained
VMP Superchargers - Loki and Odin - Differences ExplainedVMP is well known for its superchargers and offers tremendous options for Ford Mustang and F-150 models. This video dives into the Loki and Odin systems, how they are alike, and the key differences that drive additional performance through the Odin system. << Back [...]
See Full PostCheck out some of the featured builds!
2012 Ford Mustang GT – Twin Turbocharged
What makes the venerable Coyote 5.0L even better? Twin turbochargers, of course! And that's exactly what Seneca brought us his 2012 Ford Mustang GT to have done. Build setup below: • Hellion Power Systems twin turbocharger system featuring Precision Turbo & Engine 6266 CEA turbochargers• BMR Suspension K-member• Boundary Lubrication Systems [...]
See Full Post2011 Ford Mustang GT – Whipple Supercharged
Lewis brought his 2011 Ford Mustang GT back in for the next round of work: BOOST! Back in November, we started working with Lewis and his Mustang by installing his long-tube headers and performing a custom dyno calibration, coming in at 419.24whp & 371.13lbft. But shortly thereafter, Lewis got the [...]
See Full Post2014 Ford Mustang GT – Whipple
Norman brought his 2014 Ford Mustang GT in for its next round of work, including improved exhaust flow, improved handling & traction, and some boost!Up first, we installed a Gen-III 2.9L twin-screw system from Whipple Superchargers, long-tube headers from Stainless Works, billet oil pump gears from Modular Motorsports Racing - MMR, a set [...]
See Full Post2011 Ford Mustang GT
Matt brought his GT Mustang to us for some added power, sound and handling ability. We also installed wheels/tires. We utilized the following components: Kook’s Custom Headers Long-tube headers Kook’s Custom Headers X-Pipe with high-flow catalytic converters. Eibach Front and Rear sway bar kit SPC Performance panhard bar SPC Performance [...]
See Full PostOur Guarantee
12-month/12,000-mile Workmanship Warranty
As enthusiasts ourselves, we treat our customers as we would want to be treated. What does that mean? It means we advise our customers on how to best achieve their goals, we set expectations properly, give each and every customer an absolutely unforgettable experience, and above all, we stand behind our work.
Simply put: we guarantee if we miss the mark, we make it right.
This shield of assurance not only applies to the work we perform on your vehicle, but also to your vehicle itself while in our care. All customer cars are treated like our own and kept inside under lock-and-key at night. At the end of the day, we always do what’s right! Isn’t it time you work with a speed shop that can say that?
Interested to learn more about what our warranty does and does not cover? Click here to view our Customer Service Agreement.
Ready For More From Your Mustang?
Reach Out Today!Richmond, VA
4022 Glenside Drive, Richmond, VA 23228
HOURS
Monday – Friday: 8:30am-5:30pm
Closed Saturday & Sunday
Phone
(804) 214-3586