Chevrolet / Corvette /

2014 Chevrolet Corvette – Supercharged

James brought us his 2014 Chevrolet Corvette to have the LT1 loaded with forged internals, the boost turned, and to break the 700whp mark on pump gas!Up first in the shop, Andrew removed & disassembled the LT1 to the bare block, and then reassembled with Wiseco Automotive drop-in pistons, Katech CNC ported cylinder heads, Jannetty […]

View Full Post →

2017 Chevrolet Camaro SS – Whipple Supercharged

Steve brought us his 2017 Chevrolet Camaro SS in to have the LT1 put under some pressure!Up first in the shop, Archer installed a W175AX 2.9L twin-screw system from Whipple Superchargers, Super Damper from ATI Performance Products, 1.875″ primary OD long-tube headers from Stainless Works Cerakoted by Detective Coating connecting to a full exhaust system […]

View Full Post →

2015 Chevrolet Camaro ZL1 – Supercharged 700 HP

Craig brought his Red Hot 2015 Chevrolet Camaro ZL1 to get it Flex Fuel enabled, breathing better, and exceeding the 700whp mark!Up first, John strapped her down for baseline runs to establish our starting point, coming in at a healthy 556.52whp & 570.94lbft with only an air-intake system from Cold Air Inductions, Inc. Up next […]

View Full Post →

2018 Chevrolet Camaro SS – Nitrous Equipped

Brent brought us his stripped-down, Flex Fuel enabled, and gap insured (nitrous equipped) 2018 Chevrolet Camaro SS to get her dialed in and hooking up!Up first in the shop, Andrew dropped the rear subframe to install Delrin rear cradle bushings & aluminum differential bushings from BMR Suspension, Pro Kit 15″ conversion from Carlyle Racing including […]

View Full Post →

2019 Cadillac CTS-V Supercharged LT4

Brian brought us his 2019 Cadillac CTS-V for the first round of modifications!Up first, John strapped her down for some baseline dyno runs to establish our starting point (coming in at 576.90whp & 633.52lbft), then next up the shop, Thomas set the LT4 up with a Roto-Fab, LLC air-intake system, GripTec 2.30″ upper supercharger pulley, […]

View Full Post →

2010 Chevrolet Silverado – Supercharged

Allen brought us his 2010 Chevrolet Silverado to have the 5.3L freshened up and put under a little pressure! Up first in the shop, Dom performed an AFM/DOD delete utilizing OEM GM components, installed Stage-1 CNC ported cylinder heads from Total Engine Airflow, custom billet core camshaft from Cam Motion along with a C5R timing chain, valve train […]

View Full Post →