2008 WRX
2008-2014
Packages, constructed to build your vehicle to set limits, can be found below. Contact us today to learn more about what we can do for your vehicle and get a custom quote!
Contact Us Today For A Custom Quote!Packages
STOCK SHORT BLOCK About These Packages These packages use the stock short block, turbochargers, and other supporting modifications to significantly increase performance by safely forcing compressed air into the engine.
Stage 1 | Up to 255hp*
Up to +30hp*
Contact for PricingStage 2 | Up to 285hp*
Up to +60hp*
Contact for PricingStage 3 | Up to 295hp*
Up to +70hp*
Contact for PricingStage 3+ | Up to 335hp*
Up to +110hp*
Contact for PricingStage 4 | Up to 365hp*
Up to +140hp*
Contact for Pricing IAG SHORT BLOCK - With Upgrades About These Packages These packages use aftermarket short blocks, turbochargers, and other supporting modifications to significantly increase performance by safely forcing compressed air into the engine.
Stage 1 | Up to 375hp*
Up to +150hp*
Contact for PricingStage 2 | Up to 425hp*
Up to +160hp*
Contact for Pricing IAG SHORT BLOCK - STAND ALONE About These Packages These packages use aftermarket short blocks, turbochargers, and other supporting modifications to significantly increase performance by safely forcing compressed air into the engine.
Stage 1 | Rated For 500bhp/425awhp*
Open Deck
Contact for PricingStage 2 | Rated For 575bhp/500awhp*
Open Deck
Contact for PricingStage 2 | Rated For 600bhp/525awhp*
Tuff - Open Deck
Contact for PricingStage 2.5 | Rated For 700bhp/625awhp*
Closed Deck
Contact for PricingContact for Pricing
Includes
- COBB Tuning SF air-intake system
- COBB Tuning SF airbox
- COBB Tuning 3-port electronic boost control solenoid
- COBB Tuning Accessport V3 with custom Protune
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- COBB Tuning SF air-intake system
- COBB Tuning SF airbox
- COBB Tuning 3-port electronic boost control solenoid
- COBB Tuning down-pipe with integrated EPA compliant GESi G-Sport catalytic converter
- OEM Subaru gaskets, fluids, and hardware required for installation, including turbocharger outlet hardware
- COBB Tuning Accessport V3 with custom Protune
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- COBB Tuning turbocharger inlet tube
- COBB Tuning SF air-intake system
- COBB Tuning SF airbox
- COBB Tuning 3-port electronic boost control solenoid
- Process West top-mount intercooler upgrade
- OEM Subaru FIA Group N pitch stop mount
- IAG Performance V3 Street Series air/oil separator
- COBB Tuning down-pipe with integrated EPA compliant GESi G-Sport catalytic converter
- OEM Subaru gaskets, fluids, and hardware required for installation, including turbocharger outlet hardware
- COBB Tuning Accessport V3 with custom Protune
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- OEM Subaru 2009-2014 WRX IHI VF52 turbocharger
- COBB Tuning turbocharger inlet tube
- COBB Tuning SF air-intake system
- COBB Tuning SF airbox
- COBB Tuning 3-port electronic boost control solenoid
- Process West top-mount intercooler upgrade
- OEM Subaru FIA Group N pitch stop mount
- IAG Performance V3 Street Series air/oil separator
- COBB Tuning down-pipe with integrated EPA compliant GESi G-Sport catalytic converter
- OEM Subaru gaskets, fluids, and hardware required for installation, including turbocharger inlet & outlet hardware
- COBB Tuning Accessport V3 with custom Protune
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- Forced Performance FP Blue turbocharger
- COBB Tuning turbocharger inlet tube
- COBB Tuning SF air-intake system
- COBB Tuning SF airbox
- COBB Tuning 3-port electronic boost control solenoid
- Process West top-mount intercooler upgrade
- COBB Tuning LF BPV (By-Pass Valve)
- OEM Subaru FIA Group N pitch stop mount
- IAG Performance V3 Street Series air/oil separator
- COBB Tuning down-pipe with integrated EPA compliant GESi G-Sport catalytic converter
- Injector Dynamic ID1050x fuel injectors with plug-and-play adapters
- AEM Performance 340lph E85 compatible in-tank fuel pump
- ACT XACT Streetlite 13.70lb flywheel
- ACT HDSS clutch assembly
- Verus Engineering forged clutch fork
- Verus Engineering billet steel clutch fork pivot ball
- Transmission fluid – 3 quarts of Red Line Lightweight Shockproof, topped off with Motul Gear 300 75W-90
- OEM Subaru gaskets, fluids, and hardware required for installation, including turbocharger inlet & outlet hardware
- COBB Tuning Accessport V3 with custom Protune
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- IAG Performance Stage-1 built short block
- ARP 2000 Series cylinder head studs
- OEM Subaru 11mm engine oil pump
- IAG Performance V2 stainless steel oil pickup tube
- OEM Subaru water pump
- OEM Subaru timing components (idlers, tensioner, etc.) with Gates Racing RPM (Blue) belt
- GDT cylinder 4 chamber cooling system.
- NGK LFR7AIX spark plugs
- ACT XACT Streetlite 13.70lb flywheel
- ACT HDSS clutch assembly
- Verus Engineering forged clutch fork
- Verus Engineering billet steel clutch fork pivot ball
- Transmission fluid – 3 quarts of Red Line Lightweight Shockproof, topped off with Motul Gear 300 75W-90
- Forced Performance FP Blue turbocharger
- COBB Tuning turbocharger inlet tube
- COBB Tuning SF air-intake system
- COBB Tuning SF airbox
- COBB Tuning 3-port electronic boost control solenoid
- Process West top-mount intercooler upgrade
- Process West traditional turbocharger adapter hose
- OEM Subaru FIA Group N pitch stop mount
- IAG Performance V3 Street Series air/oil separator
- COBB Tuning down-pipe with integrated EPA compliant GESi G-Sport catalytic converter
- Injector Dynamic ID1050x fuel injectors with plug-and-play adapters
- AEM Performance 340lph E85 compatible in-tank fuel pump
- OEM Subaru gaskets, fluids, and hardware required for installation
- COBB Tuning Accessport V3 with custom Protune
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- IAG Performance Stage-2 built short block
- ARP 2000 Series cylinder head studs
- OEM Subaru 11mm engine oil pump
- IAG Performance V2 stainless steel oil pickup tube
- OEM Subaru WRX STI engine oil cooler components
- OEM Subaru WRX STI water pump
- OEM Subaru timing components (idlers, tensioner, etc.) with Gates Racing RPM (Blue) belt
- GDT cylinder 4 chamber cooling system.
- NGK LFR7AIX spark plugs
- ACT XACT Streetlite 13.70lb flywheel
- ACT HDSS clutch assembly
- Verus Engineering forged clutch fork
- Verus Engineering billet steel clutch fork pivot ball
- Transmission fluid – 3 quarts of Red Line Lightweight Shockproof, topped off with Motul Gear 300 75W-90
- Forced Performance FP Blue turbocharger
- COBB Tuning turbocharger inlet tube
- COBB Tuning SF air-intake system
- COBB Tuning SF airbox
- COBB Tuning 3-port electronic boost control solenoid
- Process West top-mount intercooler upgrade
- OEM Subaru FIA Group N pitch stop mount
- IAG Performance V3 Street Series air/oil separator
- COBB Tuning down-pipe with integrated EPA compliant GESi G-Sport catalytic converter
- COBB Tuning Flex Fuel conversion
- COBB Tuning fuel pressure sensor
- IAG Performance PTFE E85 compatible fuel rails and lines package
- Aeromotive A1000 fuel pressure regulator
- Injector Dynamic ID1050x fuel injectors with plug-and-play adapters
- AEM Performance 340lph E85 compatible in-tank fuel pump
- OEM Subaru gaskets, fluids, and hardware required for installation, including turbocharger outlet hardware
- Proper oil and filters required for first two oil changes of process
- 10 gallons of VP E98 fuel for mixing
- COBB Tuning Accessport V3 with custom Flex Fuel Protune
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- IAG Performance Stage-1 OEM Open Deck built short block
- ARP 2000 Series cylinder head studs
- OEM Subaru 11mm engine oil pump
- IAG Performance V2 stainless steel oil pickup tube
- OEM Subaru water pump
- OEM Subaru timing components (idlers, tensioner, etc.) with Gates Racing RPM (Blue) belt
- NGK LFR7AIX spark plugs
- OEM Subaru gaskets, fluids, and hardware required for installation
- IAG Performance V3 Street Series air/oil separator
- Proper oil and filters required for first two oil changes of process
- COBB Tuning Accessport V3 with custom Protune
- OEM Subaru gaskets, fluids, and hardware required for installation
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- IAG Performance Stage-2 OEM Open Deck built short block
- ARP 2000 Series cylinder head studs
- OEM Subaru 11mm engine oil pump
- IAG Performance V2 stainless steel oil pickup tube
- OEM Subaru WRX STI engine oil cooler components
- OEM Subaru WRX STI water pump
- OEM Subaru timing components (idlers, tensioner, etc.) with Gates Racing RPM (Blue) belt
- NGK LFR7AIX spark plugs
- OEM Subaru gaskets, fluids, and hardware required for installation
- IAG Performance V3 Street Series air/oil separator
- Proper oil and filters required for first two oil changes of process
- COBB Tuning Accessport V3 with custom Protune
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- IAG Performance Stage-2 Tuff OEM Open Deck built short block
- ARP 2000 Series cylinder head studs
- OEM Subaru 11mm engine oil pump
- IAG Performance V2 stainless steel oil pickup tube
- OEM Subaru WRX STI engine oil cooler components
- OEM Subaru WRX STI water pump
- OEM Subaru timing components (idlers, tensioner, etc.) with Gates Racing RPM (Blue) belt
- NGK LFR7AIX spark plugs
- OEM Subaru gaskets, fluids, and hardware required for installation
- IAG Performance V3 Street Series air/oil separator
- Proper oil and filters required for first two oil changes of process
- COBB Tuning Accessport V3 with custom Protune
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- IAG Performance Stage-2.5 Closed Deck built short block
- ARP 2000 Series cylinder head studs
- OEM Subaru 11mm engine oil pump
- IAG Performance V2 stainless steel oil pickup tube
- OEM Subaru WRX STI engine oil cooler components
- OEM Subaru WRX STI water pump
- OEM Subaru timing components (idlers, tensioner, etc.) with Gates Racing RPM (Blue) belt
- NGK LFR7AIX spark plugs
- OEM Subaru gaskets, fluids, and hardware required for installation
- IAG Performance V3 Street Series air/oil separator
- Proper oil and filters required for first two oil changes of process
- COBB Tuning Accessport V3 with custom Protune
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
National Speed Selected as IAG Certified Installer
We are honored to be one of the few companies across North America selected to participate in IAG Performance's pilot Certified Engine Installer program! In short, if you have your IAG engine installed & calibrated at any of National Speed's shop locations, you will receive a 2 year/24,000 mile workmanship warranty [...]
See Full PostCheck out some of the featured builds!
2013 Subaru WRX – IAG Stage 2
Manny made the trip up from Georgia with his 2013 Subaru WRX to have the EJ255 built for his long term power goals!Up first in the shop, starting with a Stage 2 short block from IAG Performance, John rebuilt the EJ255 with brand new OEM Subaru gaskets & seals, WRX [...]
See Full Post2013 Subaru WRX – XR ZERO 86HTZ Turbocharged
After sitting with the engine removed for quite some time, Josh brought us his 2013 Subaru WRX to have it brought back to life and made better than ever! Up first in the shop, starting off with a new long block from IAG Performance featuring a Magnum Closed Deck short [...]
See Full Post2009 Subaru WRX – IAG Short Block Refresh
Sherman brought us his 2009 Subaru WRX for an IAG Performance short block and to have Vlad dial the EJ255 in via COBB Tuning's Accessport V3! Build details below: Pre-existing:• COBB Tuning exhaust and down-pipe• COBB Tuning SF air-intake system• COBB Tuning bypass valve Performed by us:• IAG Performance Stage 1 EJ257 [...]
See Full Post2013 Subaru WRX STI
Daniel brought his Plasma Blue Pearl 2013 Subaru WRX STI in to have the wick turned up! First up, John is setting the EJ257 up with a list of parts including a Forced Performance Turbochargers FP Green HTZ turbocharger, PERRIN Performance turbocharger inlet, IAG Performance air/oil separator, Process West top-mount intercooler, Modern Automotive Performance down-pipe with high-flow catalytic [...]
See Full Post2013 Subaru WRX STI- IAG 400awhp
Justin brought us his super clean 2013 Subaru WRX STI for an IAG short block, Flex Fuel conversion, and get into the mid-400awhp range! Up first in the shop, starting with a Stage 2 Tuff short block from IAG Performance, Dylan rebuilt the EJ257 with brand new OEM Subaru gaskets [...]
See Full Post2014 Subaru WRX
After experiencing a connecting rod bearing failure with his 2014 Subaru WRX, Chris decided to take the opportunity to build the EJ255 for improved performance, resilience, and reliability for the long run!Up first in the shop, we removed the EJ255 to determine the extent of the failure and identify which [...]
See Full PostOur Guarantee
12-month/12,000-mile Workmanship Warranty
As enthusiasts ourselves, we treat our customers as we would want to be treated. What does that mean? It means we advise our customers on how to best achieve their goals, we set expectations properly, give each and every customer an absolutely unforgettable experience, and above all, we stand behind our work.
Simply put: we guarantee if we miss the mark, we make it right.
This shield of assurance not only applies to the work we perform on your vehicle, but also to your vehicle itself while in our care. All customer cars are treated like our own and kept inside under lock-and-key at night. At the end of the day, we always do what’s right! Isn’t it time you work with a speed shop that can say that?
Interested to learn more about what our warranty does and does not cover? Click here to view our Customer Service Agreement.
Richmond, VA
4022 Glenside Drive, Richmond, VA 23228
HOURS
Monday – Friday: 8:30am-5:30pm
Closed Saturday & Sunday
Phone
(804) 214-3586