Camaro SS
2016-2022 - 6th Generation
The Chevy 6.2 V8 absolutely screams in this 6th Gen Camaro! If you want more power out of that Chevy V8, better handling or a different look for your Camaro, look no further. Check out our performance, handling and styling packages below!
Have More Fun Today!Performance Packages
Naturally Aspirated About These Packages These packages use no power adder such as supercharger, turbocharger, or nitrous, and instead are designed to increase the engine's performance by improving efficiency.
Stage 1 | Up to 485hp*
Up to +30hp*
Contact for PricingStage 2 | Up to 505hp*
Up to +50hp*
Contact for PricingStage 3 | Up to 530hp*
Up to +75hp*
Contact for PricingStage 4 | Manual | Up to 590hp*
Up to +135hp*
Contact for PricingStage 4 | Auto | Up to 590hp*
Up to +135hp*
Contact for Pricing Supercharged About These Packages These packages use superchargers (often referred to as "blowers") and other supporting modifications to significantly increase performance by safely forcing compressed air into the engine.
Include following packages:
Stage 1 | Up to 635hp*
Up to +180hp*
Contact for PricingStage 2 | Up to 700hp*
Up to +245hp*
Contact for PricingStage 3 | Manual | Up to 860hp*
Up to +405hp*
Contact for PricingStage 3 | Auto | Up to 860hp*
Up to +405hp*
Contact for PricingContact for Pricing
Includes
- Roto-Fab cold-air intake system
- HP Tuners credits
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- Roto-Fab cold-air intake system
- Stainless Power 1.875” primary ID long-tube headers with high-flow catalytic converters
- OEM GM multi-layer steel exhaust manifold gaskets
- NGK TR6IX-11 spark plugs
- Hinson Motorsports spark plug wires
- DEI Protect-a-Boot sleeves
- DEI Heat Shroud applied to oxygen sensor wires
- HP Tuners credits
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- Roto-Fab cold-air intake system
- Ported MSD Performance Atomic AirForce intake manifold
- Nick Wiliams 103mm throttle body
- Stainless Power 1.875” primary ID long-tube headers with high-flow catalytic converters
- OEM GM multi-layer steel exhaust manifold gaskets
- NGK TR6IX-11 spark plugs
- Hinson Motorsports spark plug wires
- DEI Protect-a-Boot sleeves
- DEI Heat Shroud applied to oxygen sensor wires
- HP Tuners credits
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- National Speed custom camshaft with 38% fuel pump lobe
- HPFP lash set
- BTR phaser lock-out
- IWIS C5R/C6R timing chain
- AFM/DOD plugs
- BTR .660" lift valve spring & retainer setup
- GM LS7 drop-in lifter set
- Hardened chromoly steel pushrods
- Trunnion bearing upgrade
- OEM GM cylinder head bolts
- Roto-Fab cold-air intake system
- Ported MSD Performance Atomic AirForce intake manifold
- Nick Wiliams 103mm throttle body
- Stainless Power 1.875” primary ID long-tube headers with high-flow catalytic converters
- OEM GM multi-layer steel exhaust manifold gaskets
- NGK TR6IX-11 spark plugs
- Hinson Motorsports spark plug wires
- DEI Protect-a-Boot sleeves
- DEI Heat Shroud applied to oxygen sensor wires
- HP Tuners credits
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- National Speed custom camshaft with 38% fuel pump lobe
- HPFP lash set
- BTR phaser lock-out
- IWIS C5R/C6R timing chain
- AFM/DOD plugs
- BTR .660" lift valve spring & retainer setup
- GM LS7 drop-in lifter set
- Hardened chromoly steel pushrods
- Trunnion bearing upgrade
- OEM GM cylinder head bolts
- (optional) Circle D Specialties 258mm Pro Series 8L90 torque converter
- Roto-Fab cold-air intake system
- Ported MSD Performance Atomic AirForce intake manifold
- Nick Wiliams 103mm throttle body
- Stainless Power 1.875” primary ID long-tube headers with high-flow catalytic converters
- OEM GM multi-layer steel exhaust manifold gaskets
- NGK TR6IX-11 spark plugs
- Hinson Motorsports spark plug wires
- DEI Protect-a-Boot sleeves
- DEI Heat Shroud applied to oxygen sensor wires
- HP Tuners credits
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- Magnuson Superchargers Magnum DI TVS2650R supercharger system
- Magnuson 110mm upper supercharger pulley
- Magnuson 90mm supercharger inlet
- NGK LTR7IX-11 spark plugs
- Mightymouse Solutions catch can
- HP Tuners credits
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- Magnuson Superchargers Magnum DI TVS2650R supercharger system
- Magnuson 90mm supercharger inlet
- GripTec 95mm upper supercharger pulley
- Gates HD Fleetrunner Micro-V "Green" belt
- OEM GM LT4 Direct Injection high-pressure fuel pump
- OEM GM LT4 Direct Injection fuel injectors
- OEM GM ZL1 in-tank low-pressure fuel pump
- Roto-Fab Big Gulp 5.00" cold-air intake system
- Stainless Works 2.00” primary ID long-tube headers with high-flow catalytic converters
- OEM GM multi-layer steel exhaust manifold gaskets
- NGK LTR7IX-11 spark plugs
- Hinson Motorsports spark plug wires
- DEI Protect-a-Boot sleeves
- DEI Heat Shroud applied to oxygen sensor wires
- Mightymouse Solutions catch can
- Genuine OEM GM coolant to complete installation
- HP Tuners credits
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- Magnuson Superchargers Magnum DI TVS2650R supercharger system
- Magnuson Superchargers 103mm supercharger inlet
- Nick Williams 103mm throttle body
- GripTec 80mm upper supercharger pulley
- Gates HD Fleetrunner Micro-V "Green" belt
- GPI drop-in forged pistons - 10.25:1CR
- Callies Compstar 6.125" connecting rods
- National Speed custom spec camshaft with 32% fuel pump lobe
- HPFP lash set
- BTR phaser lock-out
- IWIS C5R/C6R timing chain
- AFM/DOD plugs
- BTR .660" lift valve spring & retainer setup
- GM LS7 drop-in lifter set
- Hardened chromoly steel pushrods
- Trunnion bearing upgrade
- ARP Pro Series cylinder head bolts
- OEM GM LT4 Direct Injection high-pressure fuel pump
- OEM GM LT4 Direct Injection fuel injectors
- OEM GM ZL1 in-tank low-pressure fuel pump
- DSX Tuning auxiliary fuel pump
- Monster Clutch S-series triple-disc clutch kit
- Roto-Fab Big Gulp 5.00" cold-air intake system
- Stainless Power 1.875" primary ID long-tube headers with 1,000hp capable GESi G-Sport GEN2 HO (High Output) EPA Compliant catalytic converters
- OEM GM multi-layer steel exhaust manifold gaskets
- NGK LTR7IX-11 spark plugs
- Hinson Motorsports spark plug wires
- DEI Protect-a-Boot sleeves
- DEI Heat Shroud applied to oxygen sensor wires
- Mightymouse Solutions catch can
- Genuine OEM GM gaskets, seals, fluids, and fasteners required for installation
- HP Tuners credits
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- Magnuson Superchargers Magnum DI TVS2650R supercharger system
- Magnuson 103mm supercharger inlet
- Nick Williams 103mm throttle body
- GripTec 80mm upper supercharger pulley
- Gates HD Fleetrunner Micro-V "Green" belt
- GPI drop-in forged pistons - 10.25:1CR
- Callies Compstar 6.125" connecting rods
- National Speed custom camshaft with 32% fuel pump lobe
- HPFP lash set
- BTR phaser lock-out
- IWIS C5R/C6R timing chain
- AFM/DOD plugs
- BTR .660" lift valve spring & retainer setup
- GM LS7 drop-in lifter set
- Hardened chromoly steel pushrods
- Trunnion bearing upgrade
- ARP Pro Series cylinder head bolts
- OEM GM LT4 Direct Injection high-pressure fuel pump
- OEM GM LT4 Direct Injection fuel injectors
- OEM GM ZL1 in-tank low-pressure fuel pump
- DSX Tuning auxiliary fuel pump
- Circle D Specialties 258mm HP Series 8L90 torque converter
- Roto-Fab Big Gulp 5.00" cold-air intake system
- Stainless Power 1.875” primary ID long-tube headers with 1,000hp capable GESi G-Sport GEN2 HO (High Output) EPA Compliant catalytic converters
- OEM GM multi-layer steel exhaust manifold gaskets
- NGK LTR7IX-11 spark plugs
- Hinson Motorsports spark plug wires
- DEI Protect-a-Boot sleeves
- DEI Heat Shroud applied to oxygen sensor wires
- Mightymouse Solutions catch can
- Genuine OEM GM gaskets, seals, fluids, and fasteners required for installation
- HP Tuners credits
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
CHECK OUT SOME FEATURED CAMARO BUILDS!
2019 Chevrolet Camaro SS- Whipple Supercharged
Billy brought us his gorgeous Orange Crush 2019 Chevrolet Camaro SS to have the LT1 Whipple supercharged and taken over the 600whp mark! Modifications performed by us below: • Whipple Superchargers 2.9L Gen-III W175ax modified to work with LT4 HPFP• Gates HD Fleetrunner Micro-V "Green" belt• OEM LT4 fuel injectors • [...]
See Full Post2016 Chevrolet Camaro SS – 850HP
Sean has been bringing his cars to National Speed since 2008, and over the years, has brought in quite a variety: 370Z for bolt-ons, EVO X for a full build, '66 Nova for a ZZ454 engine swap & build, all leading up to his latest project, his 2016 Chevrolet Camaro [...]
See Full Post2016 Chevrolet Camaro SS – E85
One question we get regularly: is Flex Fuel worth it on naturally aspirated vehicles? Zachary's 2016 Chevrolet Camaro SS is a perfect example to answer this question.After getting set up with a Roto-Fab, LLC intake system, Kooks Headers and Exhaust long-tube headers, Borla Exhaust system, MSD PerformanceAtomic AirForce intake manifold, and Nick Williams 103mm throttle body, Vlad [...]
See Full PostKrypton Green 2017 Chevrolet Camaro SS – Whipple Supercharged
Al brought us his Krypton Green 2017 Chevrolet Camaro SS to have the LT1 put under pressure and have the fuel system upgraded with ZL1/LT4 components!Up first in the shop, TJ installed a W175AX 2.9L twin-screw system from Whipple Superchargers, Super Damper from ATI Performance Products, LTR7IX-11 spark plugs from NGK Spark Plugs, [...]
See Full Post2016 Chevrolet Camaro SS – Magnuson Supercharged
Sean’s 2016 Chevrolet Camaro SS is back in the shop for its most extensive scope of work yet! This round, we're taking this already 9-second street car, and upgrading the Magnuson Superchargers TVS2300 to the new TVS2650R, rebuilding the LT1 engine with Gwatney Performance Innovation pistons, rods, and CNC ported [...]
See Full Post2017 CHEVROLET CAMARO SS – SUPERCHARGED
Carl brought his 2017 Chevrolet Camaro SS to have the LT1 put under a little pressure! The goal with this initial scope-of-work was to safely cross 600whp, with stock-like drivability & reliability, and also lay the groundwork for more performance down the road. Naturally, the Whipple Superchargers 2.9L twin-screw supercharger fits the [...]
See Full Post2017 Chevrolet Camaro SS – Whipple Supercharged
Steve brought us his 2017 Chevrolet Camaro SS in to have the LT1 put under some pressure!Up first in the shop, Archer installed a W175AX 2.9L twin-screw system from Whipple Superchargers, Super Damper from ATI Performance Products, 1.875″ primary OD long-tube headers from Stainless Works Cerakoted by Detective Coating connecting [...]
See Full Post2018 Chevrolet Camaro SS – 1,000HP
Frank brought his gorgeous Garnet Red 2018 Chevrolet Camaro SS in to have it transformed into a daily-drivable 1,000bhp+ beast! With the 6th gen on the lift, Jackson got busy with the extensive scope-of-work. Up first, the LT1 engine was removed & disassembled to the bare block, and then rebuilt [...]
See Full Post2018 Chevrolet Camaro SS – Nitrous Equipped
Brent brought us his stripped-down, Flex Fuel enabled, and gap insured (nitrous equipped) 2018 Chevrolet Camaro SS to get her dialed in and hooking up!Up first in the shop, Andrew dropped the rear subframe to install Delrin rear cradle bushings & aluminum differential bushings from BMR Suspension, Pro Kit 15" [...]
See Full Post2019 Chevrolet Camaro SS – Headers & Tune
Would you expect to gain over 100whp & 70lbft from just long-tube headers and Flex Fuel on a nearly stock naturally aspirated vehicle? Yeah, neither did Jason when he brought his Summit White 2019 Chevrolet Camaro SS in from Maryland for that exact scope-of-work, but that's where we landed!Up first, [...]
See Full Post2019 Chevrolet Camaro SS – Whipple Supercharged
Jack brought us his 2019 Chevrolet Camaro SS in to have the LT1's output taken up to LT4 level! Up first in the shop, Alex installed a W175AX 2.9L twin-screw system from Whipple Superchargers, Super Damper from ATI Performance Products, and LTR7IX-11 spark plugs from NGK Spark Plugs. Then with [...]
See Full PostOur Guarantee
12-month/12,000-mile Workmanship Warranty
As enthusiasts ourselves, we treat our customers as we would want to be treated. What does that mean? It means we advise our customers on how to best achieve their goals, we set expectations properly, give each and every customer an absolutely unforgettable experience, and above all, we stand behind our work.
Simply put: we guarantee if we miss the mark, we make it right.
This shield of assurance not only applies to the work we perform on your vehicle, but also to your vehicle itself while in our care. All customer cars are treated like our own and kept inside under lock-and-key at night. At the end of the day, we always do what’s right! Isn’t it time you work with a speed shop that can say that?
Interested to learn more about what our warranty does and does not cover? Click here to view our Customer Service Agreement.
Richmond, VA
4022 Glenside Drive, Richmond, VA 23228
HOURS
Monday – Friday: 8:30am-5:30pm
Closed Saturday & Sunday
Phone
(804) 214-3586