WRX
2015-2021
Packages, constructed to build your vehicle to set limits, can be found below. Contact us today to learn more about what we can do for your vehicle and get a custom quote!
Contact Us Today For A Custom Quote!Packages
Stock Short Block About These Packages These packages use the stock short block, turbochargers, and other supporting modifications to significantly increase performance by safely forcing compressed air into the engine.
Stage 1 | Up to 310hp*
Up to +40hp*
Contact for PricingStage 2 | Up to 330hp*
Up to +60hp*
Contact for PricingStage 3 | Up to 340hp*
Up to +70hp*
Contact for PricingStage 4 | Up to 360hp*
Up to +90hp*
Contact for PricingStage 5 | Up to 420hp*
Up to +150hp*
Contact for Pricing IAG Short Block - With Upgrades About These Packages These packages use an aftermarket short block, turbochargers, and other supporting modifications to significantly increase performance by safely forcing compressed air into the engine.
Stage 1 | Up to 360hp*
Up to +90hp*
Contact for PricingStage 2 | Up to 420hp*
Up to +150hp*
Contact for Pricing IAG Short Block - Stand Alone About These Packages These packages use an aftermarket short block, turbochargers, and other supporting modifications to significantly increase performance by safely forcing compressed air into the engine.
Stage 1 | Rated For 550bhp/450awhp*
Open Deck
Contact for PricingStage 2 | Rated For 600bhp/500awhp*
Open Deck
Contact for PricingStage 2.5 | Rated For 675bhp/575awhp*
Closed Deck
Contact for PricingContact for Pricing
Includes
- COBB Tuning Big SF air-intake system
- COBB Tuning 3-port electronic boost control solenoid
- Removal of OEM wastegate secondary restrictor pill
- Protune via COBB Tuning Accessport V3
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- COBB Tuning Big SF air-intake system
- COBB Tuning 3-port electronic boost control solenoid
- Removal of OEM wastegate secondary restrictor pill
- COBB Tuning J-pipe with resonator and integrated EPA compliant GESi G-Sport catalytic converter
- OEM Subaru turbocharger outlet hardware and gasket
- PERRIN Performance turbocharger sump restrictor
- Protune via COBB Tuning Accessport V3
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- COBB Tuning Big SF air-intake system
- PERRIN Performance turbocharger inlet tube
- COBB Tuning 3-port electronic boost control solenoid
- Removal of OEM wastegate secondary restrictor pill
- COBB Tuning J-pipe with resonator and integrated EPA compliant GESi G-Sport catalytic converter
- OEM Subaru turbocharger outlet hardware and gasket
- PERRIN Performance turbocharger sump restrictor
- PERRIN Performance pitch stop mount brace
- Process West Verti-Cooler intercooler upgrade
- COBB Tuning LF BPV (By-Pass Valve)
- PERRIN Performance pitch stop mount brace with braided stainless steel clutch line
- IAG Performance V3 Street Series air/oil separator
- OEM Subaru FIA Group N pitch stop mount
- Protune via COBB Tuning Accessport V3
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- Killer B Motorsport header
- COBB Tuning Big SF air-intake system
- PERRIN Performance turbocharger inlet tube
- COBB Tuning 3-port electronic boost control solenoid
- Removal of OEM wastegate secondary restrictor pill
- COBB Tuning J-pipe with resonator and integrated EPA compliant GESi G-Sport catalytic converter
- OEM Subaru turbocharger outlet hardware and gasket
- PERRIN Performance turbocharger sump restrictor
- PERRIN Performance pitch stop mount brace
- Process West Verti-Cooler intercooler upgrade
- COBB Tuning LF BPV (By-Pass Valve)
- PERRIN Performance pitch stop mount brace with braided stainless steel clutch line
- IAG Performance V3 Street Series air/oil separator
- OEM Subaru FIA Group N pitch stop mount
- Protune via COBB Tuning Accessport V3
- OEM Subaru gaskets, fluids, and hardware required for installation
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- Killer B Motorsport header
- COBB Tuning Big SF air-intake system
- PERRIN Performance turbocharger inlet tube
- COBB Tuning 3-port electronic boost control solenoid
- Removal of OEM wastegate secondary restrictor pill
- COBB Tuning J-pipe with resonator and integrated EPA compliant GESi G-Sport catalytic converter
- OEM Subaru turbocharger outlet hardware and gasket
- PERRIN Performance turbocharger sump restrictor
- PERRIN Performance pitch stop mount brace
- Process West Verti-Cooler intercooler upgrade
- COBB Tuning LF BPV (By-Pass Valve)
- PERRIN Performance pitch stop mount brace with braided stainless steel clutch line
- IAG Performance V3 Street Series air/oil separator
- COBB Tuning Flex Fuel conversion
- AEM Performance 340lph E85 compatible in-tank fuel pump
- Verus Engineering anti-starvation fuel pump basket door
- OEM Subaru FIA Group N pitch stop mount
- COBB Tuning Accessport V3 with custom E50 Flex Fuel Protune
- VP E98 fuel for mixing
- OEM Subaru gaskets, fluids, and hardware required for installation
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- IAG Performance Stage-1 OEM Open Deck built short block
- ARP 2000 Series cylinder head studs
- NGK ILKAR8H6 spark plugs
- ACT XACT Streetlite 13.70lb flywheel
- ACT HDSS clutch assembly
- Verus Engineering billet steel clutch fork pivot ball
- Verus Engineering forged clutch fork
- Killer B Motorsport header
- COBB Tuning Big SF air-intake system
- PERRIN Performance turbocharger inlet tube
- COBB Tuning 3-port electronic boost control solenoid
- Removal of OEM wastegate secondary restrictor pill
- COBB Tuning J-pipe with resonator and integrated EPA compliant GESi G-Sport catalytic converter
- PERRIN Performance turbocharger sump restrictor
- PERRIN Performance pitch stop mount brace
- Process West Verti-Cooler intercooler upgrade
- COBB Tuning LF BPV (By-Pass Valve)
- PERRIN Performance pitch stop mount brace with braided stainless steel clutch line
- IAG Performance V3 Street Series air/oil separator
- OEM Subaru FIA Group N pitch stop mount
- COBB Tuning Accessport V3 with custom Protune
- OEM Subaru gaskets, fluids, and hardware required for installation
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- IAG Performance Stage-2 OEM Open Deck built short block
- ARP 2000 Series cylinder head studs
- NGK ILKAR8H6 spark plugs
- ACT XACT Streetlite 13.70lb flywheel
- ACT HDSS clutch assembly
- Verus Engineering billet steel clutch fork pivot ball
- Verus Engineering forged clutch fork
- Killer B Motorsport header
- COBB Tuning Big SF air-intake system
- PERRIN Performance turbocharger inlet tube
- COBB Tuning 3-port electronic boost control solenoid
- Removal of OEM wastegate secondary restrictor pill
- COBB Tuning J-pipe with resonator and integrated EPA compliant GESi G-Sport catalytic converter
- PERRIN Performance turbocharger sump restrictor
- PERRIN Performance pitch stop mount brace
- Process West Verti-Cooler intercooler upgrade
- COBB Tuning LF BPV (By-Pass Valve)
- PERRIN Performance pitch stop mount brace with braided stainless steel clutch line
- IAG Performance V3 Street Series air/oil separator
- COBB Tuning Flex Fuel conversion
- AEM Performance 340lph E85 compatible in-tank fuel pump
- Verus Engineering anti-starvation fuel pump basket door
- VP E98 fuel for mixing
- OEM Subaru FIA Group N pitch stop mount
- COBB Tuning Accessport V3 with custom E50 Flex Fuel Protune
- OEM Subaru gaskets, fluids, and hardware required for installation
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- IAG Performance Stage-1 OEM Open Deck built short block
- ARP 2000 Series cylinder head studs
- NGK ILKAR8H6 spark plugs
- IAG Performance V3 Street Series air/oil separator
- Proper oil and filters required for first two oil changes of process
- COBB Tuning Accessport V3 with custom Protune
- OEM Subaru gaskets, fluids, and hardware required for installation
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- IAG Performance Stage-2 OEM Open Deck built short block
- ARP 2000 Series cylinder head studs
- NGK ILKAR8H6 spark plugs
- IAG Performance V3 Street Series air/oil separator
- Proper oil and filters required for first two oil changes of process
- COBB Tuning Accessport V3 with custom Protune
- OEM Subaru gaskets, fluids, and hardware required for installation
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- IAG Performance Stage-2.5 Closed Deck built short block
- ARP 2000 Series cylinder head studs
- NGK ILKAR8H6 spark plugs
- IAG Performance V3 Street Series air/oil separator
- Proper oil and filters required for first two oil changes of process
- COBB Tuning Accessport V3 with custom Protune
- OEM Subaru gaskets, fluids, and hardware required for installation
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- National Speed’s 12-month/12,000 mile vehicle program warranty
- All necessary and correct fluids
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
National Speed Selected as IAG Certified Installer
We are honored to be one of the few companies across North America selected to participate in IAG Performance's pilot Certified Engine Installer program! In short, if you have your IAG engine installed & calibrated at any of National Speed's shop locations, you will receive a 2 year/24,000 mile workmanship warranty [...]
See Full PostCheck out some of the featured builds!
Crystal White Pearl 2019 Subaru WRX STI S209 – Reliability Mods
Our first S209 - one of the 209 USDM units produced - to come through the shop and hit the rollers! Erik, the owner of this magnificent Crystal White Pearl 2019 Subaru WRX STI S209, is clearly a huge Subaru enthusiast, and is no stranger to modifying the platform. So, [...]
See Full Post2015 Subaru WRX STI – IAG Shortblock
Steve brought his 2015 Subaru WRX STI back in for the next round of work! First round, Steve came in with a goal of a super-responsive 400awhp & 400lbft on pump gas, while also laying the groundwork for more power down the line if (when) he wanted. With his end [...]
See Full Post2016 Subaru WRX STI – IAG Stage 2
Jorge brought us his 2016 Subaru WRX STI to get the engine built and ready for the next steps in power!Up first in the shop, starting with a Stage 2 short block from IAG Performance, John rebuilt the EJ257 with brand new OEM Subaru gaskets & seals, WRX STI 11mm [...]
See Full Post2018 Subaru WRX STI
Rene's 2018 Subaru WRX STI is in to have the groundwork laid for more (reliable) power! Up first, Louis is giving the EJ257 some attention in the form of an IAG Performance Stage-2.5 short block, ARP cylinder head studs, and IAG air/oil separator. This was all brought together with OEM Subaru gaskets & [...]
See Full Post2019 Subaru WRX STI
Before the first oil change was even due, Justin brought his 2019 Subaru WRX STI in for the first round of work! Starting out in the shop, Louis set the EJ257 up with a COBB Tuning SF intake system, turbocharger inlet tube, down-pipe, 3-port electronic boost control solenoid, complete Flex Fuel conversion [...]
See Full Post2019 Subaru WRX STI
Patrick brought us his 2019 Subaru WRX STI to have the wick turned up! This round, Louis installed a Blouch Turbo 20G-XT turbocharger, Invidia Exhaust down-pipe connecting to the existing Invidia Gemini R400 exhaust system, a COBB Tuning Flex Fuel conversion including in-tank fuel pump, Ethanol content sensor and associated fuel lines, fuel pressure sensor, Injector Dynamics ID1050X [...]
See Full Post2019 Subaru WRX STI – GTX3076R
Erick brought his brand new 2019 Subaru WRX STI in to have the wick turned up! Up first in the shop, Alex set the EJ257 up with a Garrett - Advancing Motion GTX3076R Gen-II turbocharger packaged for stock-placement by ATP Turbo, IAG Performance Street Series air/oil separator, PERRIN Performance turbocharger inlet tube, COBB Tuning SF intake system, GrimmSpeed top-mount [...]
See Full PostOur Guarantee
12-month/12,000-mile Workmanship Warranty
As enthusiasts ourselves, we treat our customers as we would want to be treated. What does that mean? It means we advise our customers on how to best achieve their goals, we set expectations properly, give each and every customer an absolutely unforgettable experience, and above all, we stand behind our work.
Simply put: we guarantee if we miss the mark, we make it right.
This shield of assurance not only applies to the work we perform on your vehicle, but also to your vehicle itself while in our care. All customer cars are treated like our own and kept inside under lock-and-key at night. At the end of the day, we always do what’s right! Isn’t it time you work with a speed shop that can say that?
Interested to learn more about what our warranty does and does not cover? Click here to view our Customer Service Agreement.
Richmond, VA
4022 Glenside Drive, Richmond, VA 23228
HOURS
Monday – Friday: 8:30am-5:30pm
Closed Saturday & Sunday
Phone
(804) 214-3586