- Packages
- Mopar
- SUV & Truck
- 2009-2021 - RAM - 4th Generation
- TRX – 6.2L Hemi/2.4L Supercharger Models
TRX – 6.2L Hemi/2.4L Supercharger Models
2009-2021 - RAM - 4th Generation
Packages, constructed to build your vehicle to set limits, can be found below. Contact us today to learn more about what we can do for your vehicle and get a custom quote!
Contact Us Today For A Custom Quote!Packages
Supercharged - 2019+ About These Packages These packages use superchargers (often referred to as "blowers") and other supporting modifications to significantly increase performance by safely forcing compressed air into the engine.
Include following packages:
Stage 1 | Up to 840hp*
Up to +140hp*
Contact for PricingStage 2 | Up to 880hp*
Up to +180hp*
Contact for PricingContact for Pricing
Includes
- JLT Performance passenger side air-oil separator
- Metco Motorsports 2.85” upper supercharger pulley, adds 3-4psi
- Metco Motorsports 6061 billet aluminum billet idler with 10mm wider pulley
- Gates HD Fleetrunner Micro-V “Green” belt
- MotoRad 180° thermostat
- NGK LFR7AIX spark plugs
- Genuine OEM Dodge coolant to complete installation
- HP Tuners credits
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- All necessary and correct fluids
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Contact for Pricing
Includes
- JLT Performance passenger side air-oil separator
- Metco Motorsports 2.85” upper supercharger pulley, adds 3-4psi
- Metco Motorsports 6061 billet aluminum billet idler with 10mm wider pulley
- Gates HD Fleetrunner Micro-V “Green” belt
- MotoRad 180° thermostat
- NGK LFR7AIX spark plugs
- Pinned crankshaft pulley
- Kong Performance ported supercharger & inlet port matched to 108mm throttle body
- Kong Performance 108mm throttle body
- Injector Dynamics ID1050x fuel injectors
- Genuine OEM Dodge gaskets, seals, fluids, and fasteners required for installation
- HP Tuners credits
- Pre-work dyno runs to establish baseline horsepower & torque
- Professional installation by National Speed Performance Technicians
- Professional calibration by National Speed Calibration Team on our DynoJet 424xLC2 dyno
- All necessary and correct fluids
- National Speed’s project documentation access – pictures, videos, and dyno graphs
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes. - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Check out some of the featured builds!
RAM TRX | STAGE-1 ADDS OVER 100HP
Did you ever think you’d be able to buy a 6,400lb desert runner with 702hp right off the showroom floor? Seriously, what a time to be alive. But if you’re the type that buys a RAM TRX, then you’ve probably already got the itch for more power with the [...]
See Full Post2015 Dodge Charger SRT Hellcat – 900HP
Istvan brought his 2015 Dodge Charger SRT Hellcat in for the first round of modifications! And with a Hellcat, that spells 800whp, of course. Working with the existing aFe POWER intake system, Jackson installed a Metco Motorsports 2.75" upper pulley to get the 2.4L supercharger spinning a bit higher, along with a [...]
See Full Post2017 Challenger Hellcat – 829 Wheel Horsepower
With our Stage 1 Hellcat package installed, 93 octane in the tank, and over 800whp on tap now, Frank's 2017 Dodge Challenger SRT Hellcat left the shop with a bit more jam! Modifications below: Performed by us:• TBA Machine 2.85" upper supercharger pulley• TBA Machine Hellcat 3" dual bearing supercharger idler [...]
See Full Post2018 Jeep Grand Cherokee Trackhawk
Steve brought his 2018 Jeep Grand Cherokee Trackhawk in from Maryland for the first round of modifications! Up first, Archer set the supercharged 6.2L Hemi up with a Metco 2.85" upper pulley, Metco billet idler, Stainless Works long-tube headers connected to the OEM exhaust system, Injector Dynamics ID1050X fuel injectors, all topped off with [...]
See Full Post2021 Ram 1500 TRX – Magnaflow Exhaust
Our first 2021 Ram 1500 TRX came into the Richmond shop last week! Ryan, the owner of Dodge's newest wild creation, wanted to let the supercharged 6.2L V8 breathe a little bit better and enhance things in the sound department! After everyone was finished taking their personal pictures, [...]
See Full Post2018 Jeep Grand Cherokee Trackhawk
Brian brought us his 2018 Jeep Grand Cherokee Trackhawk to have the wick turned up! Starting out in the shop, Louis set the supercharged 6.2L Hemi up with a Metco 2.75″ upper pulley, Metco billet idler, and a set of Injector Dynamics ID1050X fuel injectors, all breathing through the existing air-intake system.With [...]
See Full Post2018 Jeep Grand Cherokee Trackhawk – 800 HP
Martin brought us his daily driven 2018 Jeep Grand Cherokee Trackhawk to get it breathing easier, making more boost, and put on ethanol!Up first, Archer removed the supercharger snout for porting by Kong Performance matched to their 112mm throttle body, then once returned, moved on to installing a 2.85" upper [...]
See Full Post2021 Dodge Charger SRT Hellcat – Stage-2 Hellcat Power Package Makes 900hp+ On Pump Gas!
It’s no secret that we absolutely love the SRT Hellcat lineup! Whether you choose Challenger, Charger, Durango, Trackhawk, or TRX, each are a killer performance package right off the showroom floor. But to us, we don’t believe in leaving well enough alone, especially when there’s cheap and reliable horsepower to [...]
See Full Post2016 Dodge Challenger SRT Hellcat
A few months ago, Ron brought us his 2017 Dodge Challenger SRT Hellcat because he was bored with the stock performance. After sending him home grinning ear-to-ear with 793.43whp & 726.91lbft (check out his build here), that same day we got a call from a gentleman named Chuck, that went [...]
See Full Post2016 Dodge Challenger SRT Hellcat
Alan brought us his Jazz Blue Pearlcoat 2016 Dodge Challenger SRT Hellcat to have her taken up a notch!Working with the existing Legmaker Intakes, LLC air-intake system, Alex installed a Metco 2.75" upper pulley to get the 2.4L supercharger spinning a bit higher, along with a Gates green belt & Metco billet [...]
See Full Post2016 Dodge Charger SRT Hellcat
Romeo brought us his 2016 Dodge Charger SRT Hellcat for the first round of modifications!Up first in the shop, John set the supercharged 6.2L HEMI up with an air-intake system and air-oil separator from JLT Performance, 2.75″ upper supercharger pulley & billet idler from Metco Motorsports, a Gates HD Fleetrunner [...]
See Full Post2016 Dodge Challenger SRT Hellcat – Stage 1 Package
Sam brought us his 2016 Dodge Challenger SRT Hellcat to break the 800whp mark with our Stage-1 Package! Modifications below:• JLT Performance 125mm air-intake system• Metco Motorsports 2.85” upper supercharger pulley• TBA Machine 3.00" dual-bearing supercharger idler pulley• Gates Corporation HD Fleetrunner Micro-V "Green" belt• NGK Spark Plugs LFR7AIX spark [...]
See Full Post2016 DODGE CHALLENGER HELLCAT | STAGE-1 TO STAGE-2 STOCK SUPERCHARGER UPGRADE
Greg brought in his 2016 Dodge Challenger Hellcat early last year for our Stage-1 Stock Supercharger Package. After getting used to that additional power, he decided to take it up another notch and pull the trigger on upgrading to Stage-2! With our performance packages, Stage-1 is a stepping stone to [...]
See Full Post2016 Dodge Challenger Hellcat | Stage-1 to Stage-2 Stock Supercharger Upgrade
Greg brought in his 2016 Dodge Challenger Hellcat early last year for our Stage-1 Stock Supercharger Package. After getting used to that additional power, he decided to take it up another notch and pull the trigger on upgrading to Stage-2! With our performance packages, Stage-1 is a stepping stone [...]
See Full Post2014 Jeep Grand Cherokee SRT – Whipple Supercharged
Carl brought us his 2014 Jeep Grand Cherokee SRT to have the 6.4L Hemi built and boosted! Setup below:• Better Built Performance 426cid short block• Whipple Superchargers 2.9L W175ax twin-screw supercharger system• Whipple Superchargers 3.125" upper supercharger pulley• ATI Performance Products 6% overdrive harmonic balancer• MSD Performance fuel pump voltage [...]
See Full Post2018 Dodge Charger SRT Hellcat – 800whp
All the way in from Florida, Samuel brought us his 2018 Dodge Charger SRT Hellcat to get her turned up to 800whp! Up first in the shop, John strapped her down for pre-work dyno runs to establish our starting point, coming in at 643.65whp & 616.15lbft. From there, TJ set [...]
See Full Post2019 Dodge Challenger Hellcat Redeye – 840whp
Powered by bald eagles, freedom, and hellfire.Keith had one goal with his 2019 Dodge Challenger Hellcat Redeye when he brought her to us: Demon crushing power on pump gas. With the goal in mind, we designed a build plan to get it done, and Alex got to executing! Modifications performed [...]
See Full Post2018 Dodge Charger SRT Hellcat – 940whp
940whp, all boost, and stock long block! You've got to love how well Hellcats perform with full bolt-ons and ethanol in the tank. And this one in particular is Levonte's 2018 Dodge Charger SRT Hellcat Widebody, which is back in the shop for it's third round of work! Setup below:Round [...]
See Full Post2018 Dodge Challenger SRT Hellcat- 800whp Stage 1 Package
Jesse brought us his 2018 Dodge Challenger SRT Hellcat to break the 800whp mark with our Stage-1 Package! Modifications below:Performed by us:• Metco Motorsports 2.85” upper supercharger pulley• TBA Machine 3.00" dual-bearing supercharger idler pulley• TBA Machine 3.00" grooved tensioner pulley• Gates Corporation HD Fleetrunner Micro-V "Green" belt• NGK Spark [...]
See Full Post2017 Dodge Challenger SRT Hellcat – Stage 1 Package
Dave brought us his 2017 Dodge Challenger SRT Hellcat to turn the wick up with our Stage-1 Package! Modifications below:• JLT Performance 125mm air-intake system• Metco Motorsports 2.85” upper supercharger pulley• TBA Machine 3.00" dual-bearing supercharger idler pulley• Gates Corporation HD Fleetrunner Micro-V "Green" belt• NGK Spark Plugs LFR7AIX spark plugs• [...]
See Full Post2018 Jeep Trackhawk – 950HP
Everyone, we present to you our nomination for the Ultimate Daily Driver. The Jeep Trackhawk!Seriously, these Jeep Trackhawks are absurd. That's the only way we can describe it. How absurd? How about 800whp+ and 750lbft from only four modifications.Joe brought his 2018 Jeep Grand Cherokee Trackhawk (if you're unsure what that [...]
See Full Post2018 Jeep Grand Cherokee Trackhawk
Mike brought us his daily driven 2018 Jeep Grand Cherokee Trackhawk for the first round of modifications! Up first, Justin set the supercharged 6.2L Hemi up with a Metco 2.75″ upper pulley, Metco billet idler, Injector Dynamics ID1050X fuel injectors, Mishimoto Automotive 160° thermostat, all topped off with a JLT Performance air-intake system.With the mechanical work [...]
See Full Post2019 Dodge Challenger SRT Hellcat – 2.85″ Pulley, In-House PCM Unlock, and Tune
When we say we’re living in the Golden Age of Internal Combustion Engines, we often cite the Hellcat line as a prime example. Seriously, what’s not to love about these cars? You know, unless the magnificent sound of a roots supercharged 6.2L Hemi hammering the rev limiter mid rolling burnout [...]
See Full Post2020 Dodge Challenger SRT Hellcat – 800whp
Jacob brought us his 2020 Dodge Challenger SRT Hellcat to break the 800whp mark with our Stage-1+ Package! Modifications below:• National Speed In-house ECU/PCM unlocking service• HP Tuners SmartAccess cable• JLT Performance 125mm air-intake system• Metco Motorsports 2.85” upper supercharger pulley• TBA Machine 3.00" dual-bearing supercharger idler pulley• TBA Machine [...]
See Full PostIndigo Blue 2019 Dodge Charger SRT Hellcat
Ethanol in the tank, power stepped up, and dancing shoes on.Last round, James brought us his Indigo Blue 2019 Dodge Charger SRT Hellcat for an intake system from JLT Performance, 2.75″ upper supercharger pulley & billet idler from Metco Motorsports, ID1050X fuel injectors from Injector Dynamics, 2.00″ primary OD long-tube [...]
See Full PostOur Guarantee
12-month/12,000-mile Workmanship Warranty
As enthusiasts ourselves, we treat our customers as we would want to be treated. What does that mean? It means we advise our customers on how to best achieve their goals, we set expectations properly, give each and every customer an absolutely unforgettable experience, and above all, we stand behind our work.
Simply put: we guarantee if we miss the mark, we make it right.
This shield of assurance not only applies to the work we perform on your vehicle, but also to your vehicle itself while in our care. All customer cars are treated like our own and kept inside under lock-and-key at night. At the end of the day, we always do what’s right! Isn’t it time you work with a speed shop that can say that?
Interested to learn more about what our warranty does and does not cover? Click here to view our Customer Service Agreement.
Richmond, VA
4022 Glenside Drive, Richmond, VA 23228
HOURS
Monday – Friday: 8:30am-5:30pm
Closed Saturday & Sunday
Phone
(804) 214-3586