- Packages
- Mopar
- Challenger
- 2011-2022
- SRT 392 – 6.4L Hemi Models
SRT 392 – 6.4L Hemi Models
2011-2022
Packages, constructed to build your vehicle to set limits, can be found below. Contact us today to learn more about what we can do for your vehicle and get a custom quote!
Contact Us Today For A Custom Quote!Packages
Naturally Aspirated About These Packages These packages use no power adder such as supercharger, turbocharger, or nitrous, and instead are designed to increase the engine's performance by improving efficiency.
Stage 1 | 505-510hp
+20-25hp
$899* – Includes Installation & TuningStage 2 | 525-530hp
+40-45hp
$3,099* – Includes Installation & TuningStage 3 | Up to 585hp* | Manual
Up to +100hp*
$6,799* – Includes Installation & TuningStage 3 | 575-585hp | Automatic
+90-100hp
$7,599* – Includes Installation & Tuning Supercharged About These Packages These packages use superchargers (often referred to as "blowers") and other supporting modifications to significantly increase performance by safely forcing compressed air into the engine.
Include following packages:
Stage 1 | Up to 665hp*
Up to +180hp*
$11,399* – Includes Installation & TuningStage 2 | Up to 705hp*
Up to +220hp*
$13,399* – Includes Installation & Tuning$899* – Includes Installation & Tuning
Includes
- JLT Performance cold-air intake system
- HP Tuners credits
- Professional installation
- Professional dyno calibration
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees.
- Add $300 for 2015 - 2017 models for PCM unlock and labor for PCM removal
- Add $600 for 2018+ models for PCM unlock, Smart cable, and labor for smart cable install and PCM R&R
$3,099* – Includes Installation & Tuning
Includes
- JLT Performance cold-air intake system
- Stainless Power 1.875” primary OD long-tube headers with high-flow catalytic converters
- OEM Dodge multi-layer steel exhaust manifold gaskets
- HP Tuners credits
- Professional installation
- Professional dyno calibration
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees.
- Add $300 for 2015 - 2017 models for PCM unlock and labor for PCM removal
- Add $600 for 2018+ models for PCM unlock, Smart cable, and labor for smart cable install and PCM R&R
$6,799* – Includes Installation & Tuning
Includes
- JLT Performance cold-air intake system
- J&L passenger side air-oil separator
- Stainless Power 1.875” primary OD long-tube headers with high-flow catalytic converters
- OEM Dodge multi-layer steel exhaust manifold gaskets
- National Speed custom camshaft
- COMP Cams phaser lockout
- BTR valve spring kit with OEM seals
- Hardened pushrods
- OEM Hellcat lifters
- OEM Hellcat engine oil pump
- MotoRad 180° thermostat
- HP Tuners credits
- Genuine OEM Dodge gaskets, seals, fluids, and fasteners required for installation
- Professional installation
- Professional dyno calibration
- Mechanically eliminates MDS functionality on automatic vehicles
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees.
- Add $300 for 2015 - 2017 models for PCM unlock and labor for PCM removal
- Add $600 for 2018+ models for PCM unlock, Smart cable, and labor for smart cable install and PCM R&R - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
$7,599* – Includes Installation & Tuning
Includes
- JLT Performance cold-air intake system
- J&L passenger side air-oil separator
- Stainless Power 1.875” primary OD long-tube headers with high-flow catalytic converters
- OEM Dodge multi-layer steel exhaust manifold gaskets
- National Speed custom camshaft
- COMP Cams phaser lockout
- BTR valve spring kit with OEM seals
- Hardened pushrods
- OEM Hellcat lifters
- OEM Hellcat engine oil pump
- MotoRad 180° thermostat
- HP Tuners credits
- Genuine OEM Dodge gaskets, seals, fluids, and fasteners required for installation
- Professional installation
- Professional dyno calibration
- Mechanically eliminates MDS functionality on automatic vehicles
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees.
- Add $300 for 2015 - 2017 models for PCM unlock and labor for PCM removal
- Add $600 for 2018+ models for PCM unlock, Smart cable, and labor for smart cable install and PCM R&R
$11,399* – Includes Installation & Tuning
Includes
- Whipple Supercharger 3.0L
- Performance fuel injectors
- Fuel pump voltage booster
- OEM Mopar 2bar MAP sensor
- NGK spark plugs
- HP Tuners credits
- Genuine OEM Dodge gaskets, seals, fluids, and fasteners required for installation
- Professional installation
- Professional dyno calibration
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees.
- Add $300 for 2015 - 2017 models for PCM unlock and labor for PCM removal
- Add $630 for 2018+ models for PCM unlock, Smart cable, and labor for smart cable install and PCM R&R - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
$13,399* – Includes Installation & Tuning
Includes
- Whipple Supercharger 3.0L
- Performance fuel injectors
- Fuel pump voltage booster
- OEM Mopar 2bar MAP sensor
- NGK spark plugs
- JLT Performance passenger side air-oil separator
- Stainless Power 1.875” primary OD long-tube headers with high-flow catalytic converters
- OEM Dodge multi-layer steel exhaust manifold gaskets
- HP Tuners credits
- Genuine OEM Dodge gaskets, seals, fluids, and fasteners required for installation
- Professional installation
- Professional dyno calibration
- While this package as configured is capable of producing significantly more power, the numbers are intentionally reduced to keep the health of the stock bottom end in mind.
- ADDITIONAL OPTIONS AVAILABLE
Ask Your Performance Consultant
*Pricing shown does not include applicable taxes, shipping and shop fees.
- Add $300 for 2015 - 2017 models for PCM unlock and labor for PCM removal
- Add $630 for 2018+ models for PCM unlock, Smart cable, and labor for smart cable install and PCM R&R - *To be consistent with original manufacturer practices, our performance packages are displayed in brake horsepower (i.e., at the engine), and are advertised as an estimated increase over factory performance ratings. Displayed increases are based on our experience with previous projects. Your results may vary in either direction - sometimes significantly - for a variety of reasons including, but not limited to, the inherent variability of performance with mass-produced vehicles, atmospheric conditions, gasoline quality, pre-existing modifications, vehicle history & maintenance, and more.
Check out some of the featured SRT 392 Builds!
2013 Dodge Challenger SRT 392 – Shortblock
Talal's 2013 Dodge Challenger SRT 392 is in for quite a transformation! What's going down? Louis is disassembling the stock 6.4L HEMI, and reassembling it with a W175X 2.9L twin-screw from Whipple Superchargers, Injector Dynamics ID1050X fuel injectors, Stainless Works long-tube headers & full 3.00" dual exhaust system, a forged short block from A2Speed loaded with 10.3:1CR Diamond [...]
See Full Post2018 Dodge Charger SRT 392 – Whipple Supercharged
Chris brought us his Destroyer Grey 2018 Dodge Charger SRT 392 to get the 6.4L HEMI boosted! Up first in the shop, John removed the factory ECU so that it could be overnighted to HP Tuners and unlocked for calibration, and then moved on to installing the Stage-II 2.9L W175AX [...]
See Full Post2020 Dodge Charger 392 Scat Pack – 500whp
Lamont brought us his 2020 Dodge Charger 392 Scat Pack to have the 6.4L Hemi equipped with our 500whp+ camshaft package! Modifications below:Pre-existing: • JLT Performance air-intake system• Ported OEM intake manifold• Fast Man 86mm throttle body• 180° thermostatPerformed by us: • COMP Cams camshaft• COMP Cams phase-limiter kit• COMP [...]
See Full Post2016 Dodge Challenger SRT 392 – Whipple Supercharged
Bob brought us his 2016 Dodge Challenger SRT 392 to have her put under some pressure! Up first in the shop, Andrew set the 6.4L HEMI up with a Stage-II 2.9L W175AX twin-screw unit from Whipple Superchargers, including their upgraded air-intake system, along with the miscellaneous OEM and aftermarket odds-and-ends [...]
See Full Post2016 Dodge Charger SRT 392
Ryan brought us his 2016 Dodge Charger SRT 392 to get it breathing a lot better and thumping a lot harder! Up first, we installed a custom VVT camshaft from Cam Motion, supporting valvetrain components from COMP Cams & Manley Performance Products, Inc., along with OEM Mopar components to delete MDS, and all the [...]
See Full Post2016 Dodge Challenger SRT 392 – Hellion Twin Turbo Kit
Nathan brought us his 2016 Dodge Challenger SRT 392 to have the 6.4L Hemi twin turbocharged! Modifications below:Performed by us:• Hellion Power Systems twin-turbocharger system with 62mm cast wheel turbochargers• Stainless Works high-flow catalytic converters• Turbosmart GenV HyperGate45 45mm wastegates• Injector Dynamics ID1050x fuel Injectors• MSD Performance fuel pump voltage [...]
See Full Post2018 Dodge Challenger R/T – Whipple 3.0L
Another Whipple 3.0L equipped Hemi wrapped up and ripping! Back in May, Jim brought us his 2018 Dodge Challenger R/T for our Stage-3 NA package, and while the extra 80whp scratched the itch for a few months, it wasn't long before he was ready for more!Shortly after, he got in [...]
See Full Post2017 Dodge Charger SRT 392 – Whipple Supercharged
Jared brought us his 2017 Dodge Charger SRT 392 to get the 6.4L Hemi Whipple supercharged and over the 600whp mark! Modifications performed below: • Whipple Superchargers Stage-II 2.9L W175AX twin-screw system• Whipple Superchargers upgraded air-intake system• DeatschWerks 65lb fuel injectors• MSD Performance fuel pump voltage booster• NGK Spark Plugs LZTR7AIX [...]
See Full Post2014 Jeep Grand Cherokee SRT – Whipple Supercharged
Carl brought us his 2014 Jeep Grand Cherokee SRT to have the 6.4L Hemi built and boosted! Setup below:• Better Built Performance 426cid short block• Whipple Superchargers 2.9L W175ax twin-screw supercharger system• Whipple Superchargers 3.125" upper supercharger pulley• ATI Performance Products 6% overdrive harmonic balancer• MSD Performance fuel pump voltage [...]
See Full Post2016 Dodge Challenger SRT Hellcat
Alan brought us his Jazz Blue Pearlcoat 2016 Dodge Challenger SRT Hellcat to have her taken up a notch!Working with the existing Legmaker Intakes, LLC air-intake system, Alex installed a Metco 2.75" upper pulley to get the 2.4L supercharger spinning a bit higher, along with a Gates green belt & Metco billet [...]
See Full Post2015 Dodge Challenger Scat Pack – Camshaft
Matthew brought us his Sublime Green 2015 Dodge Challenger R/T Scat Pack to get the 6.4L Hemi breathing a lot better and thumping a lot harder! Up first, Alex installed a custom VVT camshaft from Cam Motion, supporting valvetrain components from COMP Cams & Manley Performance Products, Inc., engine oil pump from Melling Performance [...]
See Full Post2016 Dodge Challenger SRT Hellcat
A few months ago, Ron brought us his 2017 Dodge Challenger SRT Hellcat because he was bored with the stock performance. After sending him home grinning ear-to-ear with 793.43whp & 726.91lbft (check out his build here), that same day we got a call from a gentleman named Chuck, that went [...]
See Full Post2016 Dodge Charger SRT Hellcat
Romeo brought us his 2016 Dodge Charger SRT Hellcat for the first round of modifications!Up first in the shop, John set the supercharged 6.2L HEMI up with an air-intake system and air-oil separator from JLT Performance, 2.75″ upper supercharger pulley & billet idler from Metco Motorsports, a Gates HD Fleetrunner [...]
See Full Post2016 Dodge Challenger SRT Hellcat – Stage 1 Package
Sam brought us his 2016 Dodge Challenger SRT Hellcat to break the 800whp mark with our Stage-1 Package! Modifications below:• JLT Performance 125mm air-intake system• Metco Motorsports 2.85” upper supercharger pulley• TBA Machine 3.00" dual-bearing supercharger idler pulley• Gates Corporation HD Fleetrunner Micro-V "Green" belt• NGK Spark Plugs LFR7AIX spark [...]
See Full Post2016 DODGE CHALLENGER HELLCAT | STAGE-1 TO STAGE-2 STOCK SUPERCHARGER UPGRADE
Greg brought in his 2016 Dodge Challenger Hellcat early last year for our Stage-1 Stock Supercharger Package. After getting used to that additional power, he decided to take it up another notch and pull the trigger on upgrading to Stage-2! With our performance packages, Stage-1 is a stepping stone to [...]
See Full Post2009 Dodge Challenger R/T – Supercharged
Mike brought us his 2009 Dodge Challenger R/T to have the 5.7L Hemi put under a little pressure! Up first, Andrew installed a complete ProCharger P-1SC-1 supercharger system, a 170° thermostat to help keep coolant temperature in check, along with a Barton Industries short-throw shifter assembly to tighten up the shifts. Once Andrew wrapped [...]
See Full Post2015 Challenger R/T – COMP Cam
Sterling brought us his 2015 Dodge Challenger R/T with two goals in mind, improve the Hemi growl and get some more ponies out of the 5.7L! Modifications below: Performed by us:• COMP Cams Stage-2 HRT 273 camshaft• COMP Cams phase-limiter kit• Manley Performance Products, Inc. chromoly pushrods• COMP Cams valve seats, [...]
See Full Post2016 Dodge Challenger Hellcat | Stage-1 to Stage-2 Stock Supercharger Upgrade
Greg brought in his 2016 Dodge Challenger Hellcat early last year for our Stage-1 Stock Supercharger Package. After getting used to that additional power, he decided to take it up another notch and pull the trigger on upgrading to Stage-2! With our performance packages, Stage-1 is a stepping stone [...]
See Full Post2012 Dodge Challenger SRT8 – Whipple Supercharged
Richard brought us his 2012 Dodge Challenger SRT8 to have the 6.4L Hemi and NAG1 transmission built, Whipple supercharged, and bring the power up to Hellcat levels! Modifications performed below: • Better Built Performance 6.4L built short block• ARP main studs• Better Built Performance Big Gas cylinder heads with upgraded PSI [...]
See Full Post2012 Dodge Challenger R/T Scat Pack – Stage-3 NA Package
John brought us his 2012 Dodge Challenger R/T Scat Pack to get the 6.4L Hemi equipped with our Stage-3 NA package! Modifications below: • National Speed in-house Mopar ECU unlocking service • HP Tuners Smart Access cable • JLT Performance air-oil separator • COMP Cams Stage-2 HRT 273° [...]
See Full Post2011 Dodge Challenger R/T – Camshaft
Tyler brought us his 2011 Dodge Challenger R/T for a camshaft, bolt-ons, and a custom calibration by Vlad via HP Tuners! Modifications performed below: • JLT Performance air-intake system• Stainless Works 1.825" primary ID long-tube headers• Cam Motion custom billet-core camshaft• COMP Cams phase-limiter kit• Manley Performance Products, Inc. pushrods• Manley [...]
See Full Post2015 Dodge Charger SRT Hellcat – 900HP
Istvan brought his 2015 Dodge Charger SRT Hellcat in for the first round of modifications! And with a Hellcat, that spells 800whp, of course. Working with the existing aFe POWER intake system, Jackson installed a Metco Motorsports 2.75" upper pulley to get the 2.4L supercharger spinning a bit higher, along with a [...]
See Full Post2014 Chrysler 300C SRT8 – COMP Cams Stage 2 Install
Thomas brought us his 2014 Chrysler 300C SRT8 to get the 6.4L Hemi set up with our camshaft package, and address an MDS lifter failure! Modifications below:• COMP Cams Stage-2 HRT 273° camshaft• COMP Cams phase-limiter kit• COMP Cams pushrods• COMP Cams valve seats, valve seals, valve springs, valve retainers & [...]
See Full Post2016 Dodge Challenger Scat Pack – Built Short Block
John brought us his 2016 Dodge Challenger Scat Pack to have the 6.4L Hemi built and the wick turned up! Modifications below:Performed by us:• Whipple Superchargers 2.875" upper supercharger pulley• Modern Muscle Xtreme drop-in pistons and connecting rods• COMP Cams Stage-2 HRT 273° camshaft• COMP Cams phase limiter• COMP Cams [...]
See Full Post2013 Jeep Grand Cherokee SRT8 – Camshaft & Head Work
Dennis brought us his Whipple supercharged 2013 Jeep Grand Cherokee SRT8 to add a ground-pounding idle and get the 6.4L Hemi making safe power with less boost! Build details below: Performed by us: • COMP Cams Stage-2 camshaft • COMP Cams phase limiter • COMP Cams valve seats, valve [...]
See Full Post2018 Jeep Trackhawk – 950HP
Everyone, we present to you our nomination for the Ultimate Daily Driver. The Jeep Trackhawk!Seriously, these Jeep Trackhawks are absurd. That's the only way we can describe it. How absurd? How about 800whp+ and 750lbft from only four modifications.Joe brought his 2018 Jeep Grand Cherokee Trackhawk (if you're unsure what that [...]
See Full Post2018 Dodge Durango SRT – Supercharged
The 2018 Dodge Durango SRT, hailed as America's fastest, most powerful, and most capable three-row SUV. Propelled by a 392 6.4L HEMI engine, ZF manufactured 8HP70 8-speed transmission, and a gripping AWD system resulting in ~4.4sec 0-60mph times, it's definitely a solid package... one that is begging for a little [...]
See Full Post2016 Jeep Grand Cherokee SRT – Tuning
Chris brought us his baby blue powder coated Whipple Superchargers 2.9L W175ax twin-screw equipped Bright White 2016 Jeep Grand Cherokee SRT from Maryland for some attention! After a brief pre-tune mechanical inspection in the shop, Charlie strapped her down to the rollers for Vlad to perform a custom calibration via HP Tuners. With [...]
See Full Post2018 Jeep Grand Cherokee SRT – Tuning
Ethan brought his Whipple Superchargers Gen-III 2.9L W175ax twin-screw equipped 2018 Jeep Grand Cherokee SRT in for some attention! With the previous calibration offering some less than desirable part-throttle behavior, Ethan decided that while he was having us address the problem, he'd also take the opportunity to add a bit more [...]
See Full Post2018 Jeep Grand Cherokee Trackhawk
Steve brought his 2018 Jeep Grand Cherokee Trackhawk in from Maryland for the first round of modifications! Up first, Archer set the supercharged 6.2L Hemi up with a Metco 2.85" upper pulley, Metco billet idler, Stainless Works long-tube headers connected to the OEM exhaust system, Injector Dynamics ID1050X fuel injectors, all topped off with [...]
See Full Post2018 Jeep Grand Cherokee Trackhawk
Mike brought us his daily driven 2018 Jeep Grand Cherokee Trackhawk for the first round of modifications! Up first, Justin set the supercharged 6.2L Hemi up with a Metco 2.75″ upper pulley, Metco billet idler, Injector Dynamics ID1050X fuel injectors, Mishimoto Automotive 160° thermostat, all topped off with a JLT Performance air-intake system.With the mechanical work [...]
See Full Post2018 Dodge Challenger Daytona – Stage 3 NA Package
Mike brought us his 2018 Dodge Challenger Daytona to have the 5.7L Hemi equipped with our Stage-3 NA package! Modifications below:• National Speed in-house ECU/PCM unlock• SmartAccess cable• JLT Performance Series II cold-air intake system• JLT Performance 3.0 air/oil separator• Stainless Works Stainless Power 1.875" primary ID long-tube headers with high-flow [...]
See Full Post2018 Dodge Challenger – Comp Cam Install
Jim brought us his 2018 Dodge Challenger R/T with two goals in mind, improve the Hemi growl and get the 5.7L sitting over the 400whp mark! Up first in the shop, John removed the factory ECU so that it could be overnighted to HP Tuners and unlocked for calibration, and then [...]
See Full Post2017 Ram 1500 – Whipple 2.9L
On this edition of Whipple Wednesday, Keith is back for another round of work, this time with his 2017 Ram 1500 Sublime Sport! Previously here with his 2019 Dodge SRT Hellcat Redeye, Keith wanted to add some fun to his daily driver, one to match his weekend toy, in the [...]
See Full Post2018 Dodge Charger Daytona – Stage 3 Package
William brought us his 2018 Dodge Charger Daytona for our Stage-3 Naturally Aspirated package to get the 5.7L Hemi bumping and breathing better! Modifications performed by us below:• COMP Cams Stage-2 HRT 273° camshaft• COMP Cams phase-limiter kit• COMP Cams pushrods• COMP Cams valve seats, valve seals, valve springs, valve retainers [...]
See Full PostOur Guarantee
12-month/12,000-mile Workmanship Warranty
As enthusiasts ourselves, we treat our customers as we would want to be treated. What does that mean? It means we advise our customers on how to best achieve their goals, we set expectations properly, give each and every customer an absolutely unforgettable experience, and above all, we stand behind our work.
Simply put: we guarantee if we miss the mark, we make it right.
This shield of assurance not only applies to the work we perform on your vehicle, but also to your vehicle itself while in our care. All customer cars are treated like our own and kept inside under lock-and-key at night. At the end of the day, we always do what’s right! Isn’t it time you work with a speed shop that can say that?
Interested to learn more about what our warranty does and does not cover? Click here to view our Customer Service Agreement.
Richmond, VA
4022 Glenside Drive, Richmond, VA 23228
HOURS
Monday – Friday: 8:30am-5:30pm
Closed Saturday & Sunday
Phone
(804) 214-3586
Wilmington, NC
6779 Gordon Rd, Wilmington, NC 28411
Hours
Monday – Friday: 8:30am-5:30pm
Closed Saturday & Sunday
Phone
(910) 332-5901