Projects
2018 Subaru WRX STI Type RA
Casey brought us his 2018 Subaru WRX STI Type RA, 1 of only 500 produced, for the first round of modifications! Up first, Matt performed some baseline dyno pulls to establish a starting point, coming in at a healthy 287.09awhp & 293.31lbft. Up next, Alex installed an SF intake system from COBB Tuning, a Street […]
2018 Jeep Grand Cherokee Trackhawk – 800 HP
Martin brought us his daily driven 2018 Jeep Grand Cherokee Trackhawk to get it breathing easier, making more boost, and put on ethanol!Up first, Archer removed the supercharger snout for porting by Kong Performance matched to their 112mm throttle body, then once returned, moved on to installing a 2.85″ upper supercharger pulley and billet idler […]
Indigo Blue 2019 Dodge Charger SRT Hellcat
Ethanol in the tank, power stepped up, and dancing shoes on.Last round, James brought us his Indigo Blue 2019 Dodge Charger SRT Hellcat for an intake system from JLT Performance, 2.75″ upper supercharger pulley & billet idler from Metco Motorsports, ID1050X fuel injectors from Injector Dynamics, 2.00″ primary OD long-tube headers from Stainless Works, 180° […]
2015 Chevrolet Camaro ZL1 – Supercharged 700 HP
Craig brought his Red Hot 2015 Chevrolet Camaro ZL1 to get it Flex Fuel enabled, breathing better, and exceeding the 700whp mark!Up first, John strapped her down for baseline runs to establish our starting point, coming in at a healthy 556.52whp & 570.94lbft with only an air-intake system from Cold Air Inductions, Inc. Up next […]
2018 Dodge Charger SRT 392 – Whipple Supercharged
Chris brought us his Destroyer Grey 2018 Dodge Charger SRT 392 to get the 6.4L HEMI boosted! Up first in the shop, John removed the factory ECU so that it could be overnighted to HP Tuners and unlocked for calibration, and then moved on to installing the Stage-II 2.9L W175AX twin-screw unit from Whipple Superchargers, […]
2018 Chevrolet Camaro SS – Nitrous Equipped
Brent brought us his stripped-down, Flex Fuel enabled, and gap insured (nitrous equipped) 2018 Chevrolet Camaro SS to get her dialed in and hooking up!Up first in the shop, Andrew dropped the rear subframe to install Delrin rear cradle bushings & aluminum differential bushings from BMR Suspension, Pro Kit 15″ conversion from Carlyle Racing including […]
2019 Cadillac CTS-V Supercharged LT4
Brian brought us his 2019 Cadillac CTS-V for the first round of modifications!Up first, John strapped her down for some baseline dyno runs to establish our starting point (coming in at 576.90whp & 633.52lbft), then next up the shop, Thomas set the LT4 up with a Roto-Fab, LLC air-intake system, GripTec 2.30″ upper supercharger pulley, […]
2019 Ford Mustang GT – Whipple Supercharged
Chairokey brought us his Ruby Tint Red 2019 Ford Mustang GT to have the Gen-III Coyote 5.0L taken up a notch! An additional 300whp+ worth…Up first in the shop, John installed a Gen-V W185RF 3.0L twin-screw system from Whipple Superchargers including a billet Roval 132mm throttle body, an air-oil separator from JLT Performance, 2.00″ primary […]
2003 Ford Mustang SVT Cobra – Zinc Yellow
“Iron Fist, Lead Foot.”Duane brought us his beautiful Zinc Yellow 2003 Ford Mustang SVT Cobra to have the factory Eaton M112 supercharger upgraded to something a bit more potent! Up first in the shop, TJ set the Terminator up with a mono-blade ready 2.3L W140AX twin-screw unit from Whipple Superchargers, mono-blade billet throttle body from […]
2016 Dodge Challenger SRT 392 – Whipple Supercharged
Bob brought us his 2016 Dodge Challenger SRT 392 to have her put under some pressure! Up first in the shop, Andrew set the 6.4L HEMI up with a Stage-II 2.9L W175AX twin-screw unit from Whipple Superchargers, including their upgraded air-intake system, along with the miscellaneous OEM and aftermarket odds-and-ends to bring it all together. Then, […]
2004 Mitsubishi Lancer Evolution VIII – 850HP
Who doesn’t love a forward-facing turbocharger on an EVO? Clearly, Dale-John is among that crowd, and brought us his insane widebody 2004 Mitsubishi Lancer Evolution VIII to make it happen!Up first in the shop, Andrew set up the built 4G63 with twin-scroll forward-facing manifold, down-pipe, dump-tubes, and hot-side charge pipe from Sheepey Race featuring a Precision Turbo & […]
1994 Toyota Supra – Turbo Upgrade
All the way from New York, Chris brought us his Renaissance Red 1994 Toyota Supra for some attention!Up first in the shop, Louis installed an AEM Performance Electronics Infinity 506 including a 70mm drive-by-wire throttle body & pedal assembly conversion designed by Vlad, AEM IAT, 3.5bar MAP sensor, 150psig oil pressure sensor, 100psig fuel pressure sensor, 3-port […]
2010 Chevrolet Silverado – Supercharged
Allen brought us his 2010 Chevrolet Silverado to have the 5.3L freshened up and put under a little pressure! Up first in the shop, Dom performed an AFM/DOD delete utilizing OEM GM components, installed Stage-1 CNC ported cylinder heads from Total Engine Airflow, custom billet core camshaft from Cam Motion along with a C5R timing chain, valve train […]
2019 Chevrolet Camaro SS – Headers & Tune
Would you expect to gain over 100whp & 70lbft from just long-tube headers and Flex Fuel on a nearly stock naturally aspirated vehicle? Yeah, neither did Jason when he brought his Summit White 2019 Chevrolet Camaro SS in from Maryland for that exact scope-of-work, but that’s where we landed!Up first, Charlie performed pre-work dyno runs […]
2019 Subaru WRX STI – GTX3076R
Erick brought his brand new 2019 Subaru WRX STI in to have the wick turned up! Up first in the shop, Alex set the EJ257 up with a Garrett – Advancing Motion GTX3076R Gen-II turbocharger packaged for stock-placement by ATP Turbo, IAG Performance Street Series air/oil separator, PERRIN Performance turbocharger inlet tube, COBB Tuning SF intake system, GrimmSpeed top-mount intercooler, GrimmSpeed 3-port electronic boost […]
2015 Dodge Challenger Scat Pack – Camshaft
Matthew brought us his Sublime Green 2015 Dodge Challenger R/T Scat Pack to get the 6.4L Hemi breathing a lot better and thumping a lot harder! Up first, Alex installed a custom VVT camshaft from Cam Motion, supporting valvetrain components from COMP Cams & Manley Performance Products, Inc., engine oil pump from Melling Performance Parts, mid-pipe from Stainless Works, aluminum […]
2019 Ford Mustang Bullitt – 910HP
Jim brought us his Dark Highland Green 2019 Ford Mustang Bullitt to have the Gen-III Coyote 5.0L put under some pressure!Up first in the shop, Dom installed a yellow powder coated Gen-V W185RF 3.0L twin-screw system from Whipple Superchargers including a billet Roval 132mm throttle body, 2.00″ primary OD long-tube headers from Stainless Works Cerakoted by Detective Coating, Legend exhaust […]
2015 GMC Sierra 1500 – 900HP
Wu-Tang War Whistles, Nagasaki Noisy Bois, Beijing Rod Benders, Ying-Yang Spinney Things, Taiwan Tranny Trashers, Shanghai Cyclones, Mongolian Motor Manglers, Pad Thai Pounders — whatever you call them, Tom’s 2015 GMC Sierra 1500 has them, in the form of twin Garrett – Advancing Motion GT3076R turbochargers.While this truck is completely stock appearing on the outside, under the […]
2019 Subaru WRX STI
Patrick brought us his 2019 Subaru WRX STI to have the wick turned up! This round, Louis installed a Blouch Turbo 20G-XT turbocharger, Invidia Exhaust down-pipe connecting to the existing Invidia Gemini R400 exhaust system, a COBB Tuning Flex Fuel conversion including in-tank fuel pump, Ethanol content sensor and associated fuel lines, fuel pressure sensor, Injector Dynamics ID1050X fuel injectors, COBB Tuning 3-port […]
2017 Toyota GT86 – Turbocharged
Aulstyn brought us his 2017 Toyota GT86 to get it performing like it should have from the factory: with a little boost! Up first, Alex set up the 4U-GSE engine with a turbocharger system from GReddy Performance Products – GPP featuring a T518Z turbocharger, DeatschWerks DW65C fuel pump, along with the miscellaneous OEM odds-and-ends to bring it together.With the […]